Table of Contents
Advertisement
•
On the IBM 6151 system unit, do not remove the cables.
Slide the cables into the slots in the cover.
a. Insert the lower hooks into the holes in the frame.
b. Push down on the back cover.
c. Insert the clips on the system unit into the loops on the
cover.
Warning:
It is recommended that 75 mm (3 inches)
minimum clearance be provided between the IBM 6151
system unit cover louvers and adjacent walls or
obstructions to ensure adequate cooling.
AS07A057
CONTINUE TO THE NEXT PAGE
Section 3. Testing the System 3-5
Advertisement
Table of Contents
