Before You Start - IBM RT User's Setup Manual

'-
Before You Start
Use this section with task 7. If the system has operational
problems, go to IBM RT PC Problem Determination Guide.
CAUTION
Before doing any procedure, turn off power to the system
unit and all connected devices, and unplug system unit
and device power cables from electrical outlets. Refer to
"Safety Notice Translations" on page iii.
1. Ensure the power is off on all devices, including the system
unit.
2. Connect the system unit power cable to the power connector on
the rear of the system unit. Connect the power cable for each
device to the power connector on the device.
CONTINUE TO THE NEXT PAGE
Section 3. Testing the System 3-3