Gun Adapters (For 10 Series Wire Drive; Gun And Cable Assemblies - Lincoln Electric SVM154-A Service Manual

C-5
GUN ADAPTERS (FOR 10 SERIES
WIRE DRIVE)
Adapts 10 Series heads for
desired gun connection:
K1500-1
for standard Lincoln Innershield gun con-
nection, or with Fast-Made™ guns with K489-2 Fast-
Mate Adapter Kit. Also for Magnum 200/300/400 with
K466-1 connection kit, or Magnum 550 with K613-1.
K1500-2
for Magnum 200/300/400 gun with K466-
10 connection kit. (Also Tweco 4). Factory provided
with the LN-10.
K1500-3
for Magnum 550 gun with K613-7 connec-
tion. (Also Tweco 5).

GUN AND CABLE ASSEMBLIES

The following Lincoln gun and cable assemblies are
compatible with 10 Series Wire Feed heads with
appropriate K1500 Gun Adapter:
K126
(Requires K1500-1) Innershield gun and cable
assemblies are rated at 350 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K115
(Requires K1500-1) Innershield gun and cable
assemblies are rated at 450 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K470
(With K466-9 requires K1500-2) Magnum 300
GMAW gun and cable assemblies are rated 300
amps, 60% duty cycle. (Consult sales specifications
for appropriate models)
K471
(With K466-9 requires K1500-2) Magnum 400
GMAW gun and cable assemblies are rated 400
amps, 60% duty cycle. (Consult sales specifications
for appropriate models)
K497
(With K466-9 requires K1500-2) Magnum 200
GMAW gun and cable assemblies are rated 200
amps, 60% duty cycle. (Consult sales specifications
for appropriate models)
K541
(With K466-9 requires K1500-2) Magnum 400
Short Neck GMAW gun and cable assemblies are
rated 400 amps, 60% duty cycle. (Consult sales
specifications for appropriate models)
K598
(With K613-7 requires K1500-3) Magnum 550
GMAW gun and cable assemblies are rated 550
amps, 60% duty cycle. (Consult sales specifications
for appropriate models)
ACCESSORIES
The following Lincoln gun and cable assemblies are
equipped with a Fast-Mate™ connector. They can be
used with 10 Series wire feed models by installing a
K489-2 Fast-Mate™ adapter kit and a K1500-1
Lincoln Gun adapter.
K684
Magnum "Super Cool" FM water cooled
GMAW gun and cable assemblies are rated 450
amps, 100% duty cycle (CO2). (Consult sales specifi-
cations for appropriate models)
K498
Magnum 200 FM GMAW gun and cable
assemblies are rated for 200 amps 60% duty cycle.
(Consult sales specifications for appropriate models)
K534
Magnum 250L FM GMAW gun and cable
assemblies are rated for 250 amps, 30% duty cycle.
(Consult sales specifications for appropriate models)
K478
Magnum 300 FM GMAW gun and cable
assemblies are rated for 300 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K479
Magnum 400 FM GMAW gun and cable
assemblies are rated for 400 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K1558-1 REMOTE SWITCH INTERFACE
MODULE
The Module provides for user interface connection of
an external switch (flow switch, etc.) which must be
closed to enable the feeder welding operation. Also,
the Module provides for interface connection of exter-
nal equipment (fume extractor, etc.) to the Module's
isolated relay contacts which actuate when the feeder
welding gas solenoid is activated (representing weld-
ing operation in process).
K1561-1 ROBOTICS INTERFACE
MODULE
The module plugs directly into the LN-10 control board
and provides an interface to a properly equipped
Fanuc robot. When installed and properly configured,
the K1561-1 Robotics Interface Module allows com-
plete control of the welding process from the robot
controller.
The Lincoln Electric Company's Automation Center
should be contacted for questions regarding installa-
tion or operation of the Robotics Interface Module.
LN-10
C-5