Configuring Binding Parameters; Configuring The Ca Certificate - HP 3PAR StoreServ 7200 2-node Administrator's Manual

Hp 3par command line interface administrator's manual: hp 3par os 3.1.2 (qr482-96525, september 2013)
Hide thumbs Also See for 3PAR StoreServ 7200 2-node:
Table of Contents

Advertisement

3.
Set the LDAP server's host name by issuing the setauthparam ldap-server-hn
<DNS_HostName> command, where <DNS_HostName> is the value displayed by either
using the ldapsearch command or ldp.exe in
NOTE:
Account Location Parameters" (page
Example:
% ldapsearch -LLL -x -H ldap://192.168.10.13 -b "" -s base dnsHostName
ldapServiceName defaultNamingContext
dn:
dnsHostName: domaincontroller.3par.com
ldapServiceName: 3par.com:domaincontroller$@NTDOM1.3PAR.COM
defaultNamingContext: DC=3par,DC=com
The example above corresponds to
The LDAP server's IP address is 192.168.10.13.
The DNS_HostName is domaincontroller.3par.com.
The defaultNamingContext is DC=3par,DC=com.
system1 cli% setauthparam -f ldap-server 192.168.10.13
system1 cli% setauthparam -f ldap-server-hn domaincontroller.3par.com
The example above corresponds to

Configuring Binding Parameters

After you have configured the connection parameters to your LDAP server, you must configure the
binding (authentication) parameters for users.
1.
Issue the setauthparam binding simple command.
Example:
system1 cli% setauthparam -f binding simple
2.
Issue the setauthparam user-atter <DN_attribute> command to set the attribute
used to form a DN to the Windows domain.
Example
setauthparam -f user-attr NTDOM1\\
In the example above, the Windows domain is NTDOM1.

Configuring the CA Certificate

To configure the CA certificate:
1.
Obtain the location of the CA certificate from the Active Directory server's administrator.
NOTE:
form compatible with the setauthparam command.
2.
If necessary, convert the certificate to .cer file format. On a Windows system:
a.
Double-click the certificate.
The value displayed for the defaultNamingContext is used later in
If the certificate ends in the file extension .crt, it will need to be converted to a
Step
1.
24).
Step 1
and displays the following:
Step 2
through
Step
3.
"Configuring
Configuring LDAP Connections
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents