Answering Machine; Activating/Deactivating The Answering Machine; Setting Up The Answering Machine - NetComm CD2004 Mega-i-Modem User Manual

Answering Machine

The Answering Machine feature allows your modem and computer to become an answering machine.
PhoneTools supports two modes of operation:
• The Greeting Only mode issues an announcement then hangs up.
• The Greeting & Record mode issues an announcement then records the caller's message.

Activating/Deactivating the Answering Machine

To turn the answering machine on, click the button corresponding to the mode you wish to use (Greeting Only
or Greeting & Record). The active mode is signalled by a green LED:
To turn the answering machine off, click the "Answering Machine Off" button.
Please proceed to the following section on "Setting up the Answering Machine". You must create and select
a specific minimum set of elements (Greeting messages, access code) to allow the answering machine to run
normally.

Setting up the Answering Machine

1. Click the "Setup" button. The Voice tab is automatically displayed.
2. Depending on the answering machine mode you are using, select the greeting message to be issued in
the drop-down list.
Note: If you do not want to use the pre-recorded messages provided, you can record a custom
greeting message.
www.netcomm.com.au
Page 20 CD2004 Mega-i 56K V.90 Modem User Guide
YML830 Rev1