Related Manuals for NetComm NF15ACV
Summary of Contents for NetComm NF15ACV
- Page 1 QUICK START GUIDE NetCommWirele VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice NF15ACV...
-
Page 2: Package Contents
WELCOME Thank you for choosing a NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice. This guide is designed to get you up and running quickly with your new router. More advanced configuration instructions can be found in the user guide which can be downloaded from www.netcommwireless.com... - Page 3 Attach one end of the included Telephone cable to the DSL port on the back of the router. Attach the other end to the telephone wall socket. 12VDC 1.5Amp VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV...
- Page 4 WAN/Fixed line connections (such as NBN/UFB) Attach one end of the included Ethernet cable to the blue WAN port on the back of the router. Attach the other end to your fixed line modem. 12VDC 1.5Amp...
- Page 5 CONNECTING VIA AN ETHERNET CABLE If you want to connect your computer to the router via Ethernet cable, follow these instructions. Connect an Ethernet cable to one of the yellow LAN ports on the back of the NF15ACV router. 12VDC 1.5Amp...
-
Page 6: Connecting The Router To The Internet
CONNECTING THE ROUTER TO THE INTERNET These steps guide you through configuring an Ethernet WAN connection. To configure a Mobile Broadband connection, please refer to the product User Guide available at www.netcommwireless.com After you have established a connection to the router using the previous steps, open your web browser and type http://192.168.20.1 into the address bar at the top of the web browser window and press Enter. - Page 7 2.4GHz spectrum. Use this page of the wizard to enable or disable the 2.4GHz WiFi radio and SSID Broadcast status or change the SSID name, Encryption type and the Pre-Shared Key. When you have finished, click the Next button. VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV...
- Page 8 By default, the 5GHz WiFi radio is turned on and the SSID (network name) is being broadcast. This means it is discoverable by wireless client devices when they perform a scan of nearby access points on 5GHz spectrum. Use this page of the wizard to enable or disable the 5GHz WiFi radio and SSID Broadcast status or change the SSID name, Security key type and the Security key.
Need help?
Do you have a question about the NF15ACV and is the answer not in the manual?
Questions and answers