Checking The Throttle Body Joint; Checking The Fuel Line; Checking The Breather Hoses - Yamaha Grizzly550 User Manual

c. Install the V-belt.
TIP
Install the V-belt so that its arrow faces the direc-
tion shown in the illustration.
d. Remove the bolts.
L LLL L LLL L L LLL L L LLL L
EAS21020

CHECKING THE THROTTLE BODY JOINT

1. Remove:
• Left side panel
Refer to "GENERAL CHASSIS" on page 4-1.
2. Check:
• Throttle body joint "1"
Cracks/damage → Replace.
1
3. Install:
• Left side panel
Refer to "GENERAL CHASSIS" on page 4-1.
EAS21030

CHECKING THE FUEL LINE

1. Remove:
• Seat
• Right side panel
L LLL L L LLL L LLL
3-14
• Rear fender
Refer to "GENERAL CHASSIS" on page 4-1.
• V-belt cooling exhaust duct
Refer to "ENGINE REMOVAL" on page 5-1.
2. Check:
• Fuel hose "1"
Cracks/damage → Replace.
Loose connection → Connect properly.
1
3. Install:
• V-belt cooling exhaust duct
Refer to "ENGINE REMOVAL" on page 5-1.
• Rear fender
• Right side panel
• Seat
Refer to "GENERAL CHASSIS" on page 4-1.
EAS21050

CHECKING THE BREATHER HOSES

1. Remove:
• Left side panel
• Air filter case
Refer to "GENERAL CHASSIS" on page 4-1.
2. Check:
• Cylinder head breather hose "1"
• Throttle body breather hose "2"
Cracks/damage → Replace.
Loose connection → Connect properly.
ECA14920
NOTICE
Make sure the cylinder head breather hose is
routed correctly.
1
3. Install:
• Air filter case
ENGINE
2
techsparkstudio.com