EAS21750
ELECTRICAL SYSTEM
EAS21760
CHECKING AND CHARGING THE BATTERY
Refer to "ELECTRICAL COMPONENTS" on
page 9-75.
EAS21770
CHECKING THE FUSES
Refer to "ELECTRICAL COMPONENTS" on
page 9-75.
EAS21790
REPLACING THE HEADLIGHT BULBS
The following procedure applies to both of the
headlight bulbs.
1. Remove:
• Cover at the rear of the headlight "1"
2. Remove:
• Headlight bulb cover "1"
3. Disconnect:
• Headlight coupler "1"
1
4. Remove:
• Headlight bulb holder "1"
• Headlight bulb "2"
EWA13320
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
TIP
Unhook the headlight bulb holder, and then re-
move the defective bulb.
5. Install:
1
• Headlight bulb
ECA13690
NOTICE
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
1
6. Install:
• Headlight bulb holder
7. Connect:
• Headlight coupler
8. Install:
• Headlight bulb cover
• Cover at the rear of the headlight
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Adjust:
• Headlight beam (vertically)
M
MMM
a. Turn the adjusting screw "1" in direction "a" or
3-35
ELECTRICAL SYSTEM
WARNING
New
Secure the new headlight bulb with the head-
light bulb holder.
M MMM
M
M MMM
M
M MMM
M
"b".
1
2
M MMM
M
M MMM
M
MMM