Installing The Muffler; Installing The V-Belt Cooling Ducts - Yamaha Grizzly550 User Manual

EAS28P1023

INSTALLING THE MUFFLER

1. Install:
New
• Gaskets "1"
• Exhaust pipe "2"
• Exhaust pipe nuts "3"
Exhaust pipe nut
14 Nm (1.4 m·kg, 10 ft·lb)
2. Install:
• Muffler bracket "4"
• Muffler bracket bolts "5"
Muffler bracket bolt
20 Nm (2.0 m·kg, 14 ft·lb)
3. Install:
• Gasket "6" New
• Muffler "7"
• Washer "8"
• Muffler bolt "9"
TIP
Do not fully tighten the muffler bolt.
4. Install:
• Springs "10"
TIP
Install the springs so that the spring ends are
pointing inward as shown in the illustration.
5. Tighten:
• Muffler bolt "9"
Muffler bolt
20 Nm (2.0 m·kg, 14 ft·lb)
EAS28P1024

INSTALLING THE V-BELT COOLING DUCTS

1. Install:
• V-belt cooling intake duct joint "1"
• V-belt cooling intake duct "2"
M MMM
a. Position the V-belt cooling intake duct joint
with its arrow mark "a" pointing toward the en-
gine.
b. Align the projection on the V-belt cooling in-
10
take duct joint with the rib on the crankcase in
the area "b" shown in the illustration.
c. Align the screw head with the seam on the V-
belt cooling intake duct joint in the area "c"
shown in the illustration.
d. Align the projection on the V-belt cooling in-
take duct with the projection on the V-belt
cooling intake duct joint in the area "d" shown
10 in the illustration.
e. Align the bend in the screw clamp with the
projection on the V-belt cooling intake duct
joint in the area "e" shown in the illustration.
5-2
ENGINE REMOVAL
5 9
8
5
10
7
4
6
10
M MMM M M MMM M M MMM M M MMM
techsparkstudio.com
2
1
3
3
M M MMM M MMM