Yamaha Grizzly550 User Manual page 69

1. Tail/brake light lead
2. Rectifier/regulator lead
3. AC magneto lead
4. Speed sensor lead
5. Final drive case breather hose
6. Fuel hose
7. Fuel pump lead
8. Wire harness
A. To tail/brake light
B. Fasten the tail/brake light lead to the frame with
plastic locking ties, making sure to face the end of
each tie downward.
C. Install the plastic band near the split in the wire
harness.
D. Route the tail/brake light lead to the outside of the
frame.
E. Face the end of the plastic band downward.
F. Pass the final drive case breather hose through the
guide.
2-40
CABLE ROUTING
techsparkstudio.com