1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Offroad Vehicle
  5. GRIZZLY YFM70GPAL
  6. Owner's manual

Yamaha GRIZZLY YFM70GPAL Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
READ THIS MANUAL CAREFULLY!
It contains important safety information.
LIRE ATTENTIVEMENT CE MANUEL!
Il comprend d'importantes informations de sécurité.
¡LEA ESTE MANUAL ATENTAMENTE!
Contiene indicaciones importantes acerca de la seguridad.
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
YFM70GPAL/YFM70GPSL
OWNER'S MANUAL
YFM700FWAD
BDE-F8199-60

Advertisement

Table of Contents
loading

Related Manuals for Yamaha GRIZZLY YFM70GPAL

Summary of Contents for Yamaha GRIZZLY YFM70GPAL

  • Page 1 READ THIS MANUAL CAREFULLY! It contains important safety information. LIRE ATTENTIVEMENT CE MANUEL! Il comprend d’importantes informations de sécurité. ¡LEA ESTE MANUAL ATENTAMENTE! Contiene indicaciones importantes acerca de la seguridad. OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE MANUAL DEL PROPIETARIO YFM70GPAL/YFM70GPSL YFM700FWAD BDE-F8199-60...
  • Page 2 Original instructions Notice originale Manual original PRINTED IN USA 2019.05-0.5×1 CR (E,F,S)
  • Page 3 READ THIS MANUAL CAREFULLY! It contains important safety information. OWNER’S MANUAL YFM70GPAL/YFM70GPSL YFM700FWAD WARNING This ATV should not be ridden by anyone under 16 years of age. BDE-F8199-60-E0...
  • Page 4 Read this manual carefully before operating this vehicle. This manual should stay with this ve- hicle if it is sold. EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product YFM700FWAD :BDE2 (5Y4AMK5W0K0500351–)
  • Page 5 Congratulations on your purchase of the Yamaha YFM70GPAL / YFM70GPSL / YFM700FWAD. This ATV represents the result of many years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
  • Page 6 EBU17331 IMPORTANT MANUAL INFORMATION EBU17344 FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS IN- JURY OR DEATH. Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential per- sonal injury hazards.
  • Page 7 Please check your local riding laws and regulations before operating this ATV. EBU17411 YFM70GPAL / YFM70GPSL / YFM700FWAD OWNER’S MANUAL ©2020 by Yamaha Motor Co., Ltd. 1st edition, March 2019 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd.

  • Page 8: Table Of Contents

    EBU17421 TABLE OF CONTENTS VEHICLE IDENTIFICATION ......1-1 Fuel tank cap ..........5-19 Identification numbers ........1-1 Fuel ............5-20 Seat ............5-21 LOCATION OF THE WARNING AND Storage compartments......5-22 SPECIFICATION LABELS ......2-1 Front carrier ..........5-26 Rear carrier ..........5-26 SAFETY INFORMATION ........3-1 Front and rear shock absorbers ....
  • Page 9 OPERATION ........... 7-1 Periodic maintenance chart: Emission Starting the engine........7-1 control system .......... 9-3 Operating the drive select lever and Periodic maintenance chart: General driving in reverse........7-2 maintenance and lubrication ....9-5 Engine break-in ........... 7-4 Removing and installing panels....9-10 Parking ............
  • Page 10 Checking and lubricating the brake pedal ............9-50 Checking the wheel hub bearings.....9-51 Checking the stabilizer bushes ....9-51 Lubricating the rear knuckle pivots...9-51 Lubricating the steering shaft ....9-52 Battery............9-52 Replacing a fuse ........9-56 Replacing a headlight bulb .......9-58 Adjusting a headlight beam ......9-60 Brake/tail light ...........9-61 Removing a wheel........9-61 Installing a wheel........9-62...

  • Page 11: Vehicle Identification

    EBU38860 VEHICLE IDENTIFICATION EBU28205 Identification numbers Record the vehicle identification number and model label information in the spaces provided below. VEHICLE IDENTIFICATION NUMBER: MODEL LABEL INFORMATION: 1. Vehicle identification number (front left side) EBU26053 Model label The model label is affixed at the location shown. EBU26032 Vehicle identification number The vehicle identification number is stamped into...
  • Page 12 1. Model label Your specific model can be identified by checking the model type code found on the model label. * * * * - * * * 1. Model type code 2. Production code 3. Color code...

  • Page 13: Location Of The Warning And Specification Labels

    Read and understand all of the labels on your ATV. These labels contain important information for safe and proper operation. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, request a re- placement label from your Yamaha dealer.
  • Page 14 For Europe...
  • Page 15 1 BDE2 1 BDE7 / BDEA / BDEE YFM700FWAD YFM700FWAD 2019 2019 36.0 kW 36.0 kW YAMAHA MOTOR CO., LTD. YAMAHA MOTOR CO., LTD. 325 kg 330 kg 2500 SHINGAI, IWATA, JAPAN 2500 SHINGAI, IWATA, JAPAN B31-F155A-60 B4F-F155A-60 1 BDEJ...
  • Page 16 0.50 kgf/cm² 0.50 kgf/cm² 35.0 kPa 30.0 kPa 50.0 kPa 50.0 kPa 5.0 psi 5.0 psi 7.3 psi 7.3 psi 0.35 kgf/cm² 0.30 kgf/cm² 0.50 kgf/cm² 0.50 kgf/cm² 5.0 psi 4.4 psi 7.3 psi 7.3 psi YAMAHA B5K-F816M-M0 YAMAHA BB5-F816M-M0...
  • Page 17 B4F-F817K-00 YAMAHA 1HP-F811R-00...
  • Page 18 < 4 kg ( 9 lbs) B4F-F817R-10 < 0.5 kg ( 1 lb ) 37S-F816N-00 YAMAHA 1P0-F816R-00...
  • Page 19 Familiarize yourself with the following pictograms and read the explanatory text, then make sure to check the pictograms that apply to your model. Read the Owner’s manual. NEVER use on paved roads. ALWAYS use an approved helmet and NEVER carry passengers. protective gear.
  • Page 20 (Weight on the trailer tongue.) Model Name **** ****** Overloading can cause loss of control. *** kW YAMAHA MOTOR CO., LTD. Loss of control can result in severe injury or Max. Power *** kg 2500 SHINGAI, IWATA, JAPAN death.
  • Page 21 For Oceania...
  • Page 22 WARNING LOAD LIMIT NEVER ride as a passenger. 50 kg (110 lbs) Passengers can cause YAMAHA B16-F4877-A0 a loss of control, resulting in SEVERE INJURY or DEATH. YAMAHA MAXIMUM LOADING LIMIT LOAD LIMIT PULLING LOAD: 5880 N (600 kgf) 1322 lbf...
  • Page 23 When riding with cargo or towing a trailer : Reduce speed and allow more room to stop. Avoid hills and rough terrain. Maximum Vehicle Load : 240 kg, (530 lbs) Includes weight of operator, cargo and accessories (and if applicable, trailer tongue weight). YAMAHA B16-F816M-00 2-11...
  • Page 24 Maximum Vehicle Load : 240 kg, (530 lbs) Includes weight of operator, cargo and accessories UNDER (and if applicable, trailer tongue weight). YAMAHA B4F-F816M-00 Operating this ATV if you are under the age of 16 increases your chance of severe injury or death.
  • Page 25 WARNING LOAD LIMIT Improper ATV use can result in SEVERE INJURY or DEATH. 4 kg (9 lbs) YAMAHA B4F-F4877-A0 ALWAYS USE NEVER USE NEVER CARRY NEVER USE AN APPROVED ON PUBLIC PASSENGERS WITH DRUGS HELMET AND ROADS OR ALCOHOL PROTECTIVE...

  • Page 26: Safety Information

    EBU17432 SAFETY INFORMATION SAFETY INFORMATION  Never allow a child under age 16 to operate an EBU27255 ATV without adult supervision, and never allow AN ATV IS NOT A TOY AND CAN BE HAZARD- continued use of an ATV by a child if he or she OUS TO OPERATE.
  • Page 27  Never operate at speeds too fast for your skills  Never operate the ATV on hills too steep for the or the riding conditions. Always go at a speed ATV or for your abilities. Practice on smaller hills that is proper for the terrain, visibility, operating before attempting larger hills.
  • Page 28  Never operate an ATV in fast flowing water or in technique described in this manual on level ground. Avoid crossing the side of a steep hill if water deeper than that recommended in this possible. manual. Remember that wet brakes may have ...
  • Page 29  Never maintain an ATV without proper knowl- vehicle. If the vehicle is in safe operating con- edge. Contact an authorized ATV dealer to in- dition and you can safely operate it, restart it form you on basic ATV maintenance. Certain and ride gently back to camp or other known maintenance can only be carried out by certified location where you can receive medical at-...
  • Page 30 While you may find aftermarket products similar in of the operator and may limit control ability, design and quality to genuine Yamaha accesso- therefore, such accessories are not recom- ries, recognize that some aftermarket accessories mended.
  • Page 31  Do not run engine in poorly ventilated or par- gerous loss of lights or engine power. Also, the battery tends to discharge more quickly if elec- tially enclosed areas such as barns, garages, trical accessories are added. or carports. ...

  • Page 32: Description

    EBU17681 DESCRIPTION EBU17691 EBU17701 Left view Right view 1. Radiator cap 1. Rear storage compartment 2. Battery 2. Fuel tank cap 3. Fuses 3. Tool kit 4. Air filter case 4. Center storage compartment 5. Spark arrester 5. Spark plug 6.

  • Page 33: Controls And Instruments

    EBU17715 Controls and instruments 2 3 4 1. Drive select lever 2. Rear brake lever 3. Handlebar switches 4. Horn switch 5. Rear brake fluid reservoir 6. Winch switch (equipped models) 7. Multi-function display 8. Front brake fluid reservoir 9. On-Command 4WD switches 10.Throttle lever 11.Front brake lever 12.Front storage compartment...

  • Page 34: Instrument And Control Functions

    EBU17739 INSTRUMENT AND CONTROL FUNCTIONS EBU29913 Main switch 1. Main switch “ ” (on) All electrical systems are supplied with power. The engine can be started. The key cannot be re- moved. “ ” (off) All electrical systems are off. The key can be re- moved.

  • Page 35: Indicator Lights And Warning Lights

    EBU26699 EBU17992 Low-range indicator light “ ” Indicator lights and warning lights This indicator light comes on when the transmis- sion is in the low-range position. EBU17982 High-range indicator light “ ” This indicator light comes on when the transmis- sion is in the high-range position.
  • Page 36 When this occurs, the display will indicate The coolant temperature warning light can be an error code (see page 5-10). Have a Yamaha checked by turning the key to “ ” (on). The dealer check the self-diagnosis system.
  • Page 37 “ ” (on). If the  Due to the synchronizing mechanism in the dif- warning light does not come on, have a Yamaha ferential gear case, the four-wheel drive icon dealer check the electrical circuit.

  • Page 38: Multi-Function Display

     clock EBU38113 Multi-function display  hour meter  voltage display  coolant temperature display  fuel gauge  brightness control mode  error code display Speedometer The speedometer shows the vehicle’s traveling speed. The speedometer can be set to “MPH” or “km/h”.
  • Page 39 Odometer and tripmeters Push the “SELECT” button to switch between the odometer “ODO”, the tripmeters “TRIP A” and “TRIP B”, and the service tripmeter “ ” in the following order: ODO → TRIP A → TRIP B → → ODO To reset a tripmeter, set the display to the tripme- ter you want to reset, then push the “RESET”...
  • Page 40 Clock, hour meter, voltage display and coolant CLOCK → HOUR → VOLT → → CLOCK temperature display To set the clock 1. Set the display to the clock. 2. Push both the “SELECT” button and “RE- SET” button for 2 seconds. The hour digits will start flashing.
  • Page 41  The coolant temperature display can be set to circuit or the battery may be faulty. If this oc- “°C” or “°F”. To switch the temperature units, curs, have a Yamaha dealer check or repair the turn the key to “ ” (off), then while holding the vehicle.
  • Page 42 If the electrical circuit for the fuel gauge is not working correctly, all display segments will flash Fuel gauge repeatedly. Have a Yamaha dealer check the vehi- cle. Brightness control mode 1. Fuel gauge The fuel gauge indicates the amount of fuel in the fuel tank.
  • Page 43 2. Push the “RESET” button to set the bright- If the display indicates an error code, note the ness level. code number and have a Yamaha dealer check 3. Push the “SELECT” button to confirm the se- the vehicle. lected brightness level and exit the brightness...

  • Page 44: Handlebar Switches

    EBU18068 Handlebar switches LOCK 1. On-Command drive switch “2WD/4WD” 2. On-Command drive switch “4WD/LOCK” 1. Light switch “ /OFF” 3. Drive switch lock lever 2. Start switch “ ” EBU18081 3. Engine stop switch “ ” Engine stop switch “ ”...
  • Page 45 EBU18102 EBUM0432 Start switch “ ” Winch switch “OUT/IN” (equipped models) Push this switch to crank the engine with the start- This switch is used when operating the winch er. See the starting instructions on page 7-1 prior (page 5-28). Read this manual and the Basic to starting the engine.
  • Page 46 NOT being pushed, this could the front and rear wheels, giving increased trac- indicate a malfunction in the electrical system. In tion. this case, take the ATV to a Yamaha dealer at the EWB00164 first opportunity. WARNING...
  • Page 47 handle differently. This could distract the oper- differential gear lock or vice versa while mov- ator and increase the risk of losing control and ing may cause the ATV to handle differently un- of causing an accident. expectedly. This could distract the operator and increase the risk of losing control and causing an accident.
  • Page 48 EWB00141 WARNING  When the switch is set to “LOCK” or “4WD”, the Always ride at a slow speed when the ATV is in differential gear lock icon and indicator light will differential gear lock, and allow extra time and flash until the differential gear is completely distance for maneuvers.

  • Page 49: Throttle Lever

    EBU18286 EBU18325 Throttle lever Speed limiter 1. Locknut 1. Throttle lever 2. Adjusting screw 3. No more than 12 mm (0.47 in) Push the throttle lever to increase engine speed. Spring tension returns the lever to the rest position The speed limiter keeps the throttle from fully when released.

  • Page 50: Front Brake Lever

    the adjusting screw in direction (b). Do not The front brake lever is located on the right han- turn the adjusting screw out more than 12 dlebar. To apply the front brake, pull the brake le- mm (0.47 in) or the throttle cable could be ver toward the handlebar grip.

  • Page 51: Drive Select Lever

    EBU18614 Drive select lever 1. Rear brake lever The brake pedal is located on the right side of the 1. Drive select lever ATV and the rear brake lever is located on the left The drive select lever is used to shift the transmis- handlebar.

  • Page 52: Fuel Tank Cap

    of sparks, open flames, or other sources of EBU37980 Fuel tank cap ignition such as the pilot lights of water heat- ers and clothes dryers. 2. Do not overfill the fuel tank. When refueling, be sure to insert the pump nozzle into the fuel tank filler hole.

  • Page 53: Fuel

    3. Wipe up any spilled fuel immediately. Recommended fuel: NOTICE: Immediately wipe off spilled fuel Regular unleaded gasoline only with a clean, dry, soft cloth, since fuel may Fuel tank capacity: deteriorate painted surfaces or plastic 18 L (4.8 US gal, 4.0 Imp.gal) parts.

  • Page 54: Seat

    About the recommended fuel EBU34141 Seat If knocking or pinging occurs, try a different brand or higher octane gasoline. To remove the seat For Europe, use RON 95 octane or higher. For Oceania, use RON 91 octane or higher. Gasoline containing ethanol can be used if the ethanol content does not exceed 10% (E10).

  • Page 55: Storage Compartments

    To install the seat ECB00831 NOTICE Do not store metal or sharply edged objects, like tools, in the storage compartments. If they must be stored, wrap them in appropriate cushion material to prevent damaging the stor- age compartments. The front storage compartment is located at the front right side of the ATV.
  • Page 56 1. Front storage compartment 1. Center storage compartment lid The center storage compartment is located in front of the seat. To access the storage compart- ment, open the storage compartment lid. 1. Center storage compartment 5-23...
  • Page 57 The rear storage compartment is located under the taillight. To access the storage compartment, open the storage compartment lid by turning the storage compartment knob 1/4 turn counterclock- wise. 1. Rear storage compartment When storing any documents in the storage com- partments, be sure to wrap them in a plastic bag so that they will not get wet.
  • Page 58 A drain plug is fitted at the bottom of each storage compartment. If any water collects in a storage compartment, remove the drain plug, drain the water, and then install the drain plug. 1. Center storage compartment drain plug 1. Front storage compartment drain plug 1.

  • Page 59: Front Carrier

    Uneven adjustment can cause poor handling A special wrench can be obtained at a Yamaha and loss of stability, which could lead to an ac- dealer to make this adjustment.
  • Page 60 Front spring preload setting: Minimum (soft): Standard: Maximum (hard): Rear spring preload setting: Minimum (soft): Standard: 1. Special wrench Maximum (hard): 5-27...

  • Page 61: Winch (Equipped Models)

    This ATV is equipped with a 5 cm (2 in) trailer hitch 3. Hook strap receiver. 4. Fairlead Trailer towing equipment can be obtained at a Yamaha dealer. (See page 7-6 for precaution in- EWBM0041 formation.) WARNING To reduce the risk of injury or death, read and follow the Basic Guide to Winching Techniques prior to use.

  • Page 62: Auxiliary Dc Jack

    EBU19186 Auxiliary DC jack 1. Trailer hitch receiver 1. Auxiliary DC jack cap 2. Auxiliary DC jack Auxiliary DC jack system capacity: 10.0 A (120 W) (BDE3, BDEK) 6.0 A (72 W) (BDE2, BDE7, BDEA, BDEE, BDEJ) 5-29...
  • Page 63 ECB03760 NOTICE  When inserting or removing the accessory pow- Do not use any single electrical accessory or er plug, turn the accessory off. combination of accessories that require more  When the auxiliary DC jack is not being used, than the stated capacity at any one time.

  • Page 64: Pre-Operation Checks

    Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 65 ITEM ROUTINE PAGE • Check operation. If soft or spongy, have Yamaha dealer bleed hy- draulic system. • Check brake pads for wear, and replace if necessary. Front brake 6-3, 9-43, 9-44, 9-46 • Check brake fluid level in reservoir, and add specified brake fluid to specified level if necessary.

  • Page 66: Fuel

    Make sure that the differential gear oil is at the should be a firm feeling when the brakes are ap- specified level. Add oil as necessary. (See page plied. If not, have a Yamaha dealer check the 9-27.) brake system.

  • Page 67: Throttle Lever

    Make two measurements of the tire open smoothly and spring back to the idle position pressure and use the second reading. Dust or dirt when released. Have a Yamaha dealer correct if in the gauge could cause the first reading to be in- necessary.
  • Page 68 Tire pressure must be checked and set when the OPERATING TIRE PRESSURE (cold): tires are cold. The tire pressure should be the For Oceania same on both sides, and must be adjusted ac- Front: (Recommended) cording to vehicle loading conditions. Set the tire 35.0 kPa (0.350 kgf/cm², 5.0 psi) pressure as specified below.
  • Page 69 For Europe Maximum load: No cargo or trailer: Vehicle: Front: (Recommended) 240.0 kg (530 lb) 35.0 kPa (0.350 kgf/cm², 5.0 psi) The vehicle’s maximum load is the com- Rear: (Recommended) bined weight of the rider, accessories, car- 30.0 kPa (0.300 kgf/cm², 4.4 psi) go, and trailer tongue weight.
  • Page 70 Front: This ATV is equipped with tubeless tires and tire Manufacturer/model: air valves. After extensive tests, only the tires list- MAXXIS/MU01Y (BDEJ, BDEK) ed below are approved for this model by Yamaha. MAXXIS/MU05Y (BDE2, BDE7, BDEA, EWB02552 BDEE, BDE3) WARNING...

  • Page 71: Chassis Fasteners

    Aftermarket tires and rims The tires and rims that came with your ATV were designed to match the performance capabilities and to provide the best combination of handling, braking, and comfort. Other tires, rims, sizes, and combinations may not be appropriate. EBU19841 Chassis fasteners Make sure that all nuts, bolts and screws are...

  • Page 72: Operation

    See the “Engine break-in” section on page 7-4 the ATV. If there is a control or function you do not prior to operating the engine for the first time. understand, ask your Yamaha dealer. EWB00632 To start the engine WARNING 1.

  • Page 73: Operating The Drive Select Lever And Driving In Reverse

    If the indicator light does not come on, EBU36230 Operating the drive select lever and have a Yamaha dealer check the electrical driving in reverse circuit. 3. Apply the rear brake lever or brake pedal. ECB03330 NOTICE 4. Completely close the throttle lever, then push...
  • Page 74 reverse, make sure there are no people or ob- stacles behind you. When it is safe to proceed, go slowly. 1. Bring the ATV to a complete stop. 2. Apply the brake pedal. 3. Shift from neutral to reverse or from reverse to park and vice versa by moving the drive se- lect lever along the shift guide.

  • Page 75: Engine Break-In

    Vary the speed of the ATV regularly. Do not oper- should come on. If the indicator light does not ate it at one set throttle position. come on, have a Yamaha dealer check the elec- trical circuit. 120–240 km (75–150 mi) or 10–20 hours ...

  • Page 76: Parking On A Slope

    Yamaha for use on your ATV. Many companies with no connection to Yamaha manufacture parts and accessories or offer other modifications for Yamaha vehicles. Yamaha is not in a position to test the products that these aftermarket compa- nies produce. Therefore, Yamaha can neither en-...
  • Page 77 Yamaha or modifications not specifically bulky object attached to the handlebars which recommended by Yamaha, even if sold and in- could make steering difficult, an accessory that stalled by a Yamaha dealer. limits your ability to move around on the seat, or one that limits your view.
  • Page 78  Never exceed the weight limits shown. An over-  Do not exceed the maximum tongue weight. loaded ATV can be unstable. You can measure tongue weight with a bath- room scale. Put the tongue of the loaded trailer MAXIMUM LOADING LIMIT on the scale with the tongue at hitch height.
  • Page 79  Avoid making sharp turns unless at very slow speeds.  Avoid hills and rough terrain. Choose terrain carefully. Added weight affects the stability and handling of the ATV.

  • Page 80: Riding Your Atv

    EBU21142 RIDING YOUR ATV...

  • Page 81: Getting To Know Your Atv

    RIDE WITH CARE AND GOOD JUDGMENT EBU34732 Get training if you are inexperienced. GETTING TO KNOW YOUR ATV EWB01382 This ATV is mainly for utility use, but may also be WARNING used for recreation. This section, Riding your ATV,  Do not operate this ATV or allow anyone else provides general ATV riding instructions for recre- to operate it without proper instruction.
  • Page 82 the time to learn the basic techniques well before This ATV is designed to carry the operator and attempting more difficult maneuvers. Become fa- cargo only – passengers prohibited. miliar with this ATV at slow speeds first, even if you The long seat is to allow the operator to shift posi- are an experienced operator.
  • Page 83 Apparel Always wear the following to reduce risk of injury in an accident:  Approved motorcycle helmet that fits properly  Eye protection (goggles, helmet face shield, or protective eyewear)  Over-the-ankle boots, gloves, long-sleeved shirt or jacket, and long pants An approved helmet and other personal protective equipment can reduce the severity of injuries in an accident.
  • Page 84 1. Protective clothing Pre-operation checks 2. Goggles Always inspect your ATV each time you use it to 3. Gloves make sure the ATV is in safe operating condition. 4. Boots 5. Helmet Perform the pre-operation checks listed on page 6-1. Always follow the inspection and mainte- Do not operate after or while consuming alco- nance procedures and schedules described in the hol or drugs.
  • Page 85  Do not exceed the maximum loading limits fully opening, even when the throttle lever is pushed to the maximum. Turning in the adjusting for the vehicle (see “MAXIMUM LOADING screw limits the maximum engine power available LIMIT” in this section or vehicle labeling). ...
  • Page 86 drive slowly (shift into first gear or low drive if avail- MAXIMUM LOADING LIMIT able on this model) whenever you are carrying ATV loading limit (total weight of cargo, rid- heavier loads or when towing a trailer. er, accessories, and tongue): 240.0 kg (530 lb) During operation Front carrier:...
  • Page 87 Avoid wheelies and jumping. WARNING! At- parts and accessories added to this ATV should tempting wheelies, jumps, and other stunts in- be genuine Yamaha or equivalent components creases the chance of an accident, including designed for use on this ATV and should be in- an overturn.
  • Page 88 Exhaust system To prevent burns, avoid touching the exhaust sys- tem. Park the ATV in a place where pedestrians or EWB01502 WARNING children are not likely to touch it.  Dry grass or brush or other combustible ma- terial accumulated around the engine area could catch fire.

  • Page 89: Be Careful Where You Ride

    BE CAREFUL WHERE YOU RIDE know your country’s laws and regulations before This ATV is designed for use on unpaved surfaces you ride on unpaved public streets or roads. Do only. WARNING! Paved surfaces may seriously not ride on any paved public street, road or motor- affect handling and control of the ATV, and way.
  • Page 90 ful when operating on unfamiliar terrain. Al- terrain could cause loss of traction or ATV con- ways be alert to changing terrain conditions trol, which could result in an accident, includ- when operating the ATV. ing an overturn. [EWB01532] [EWB01542] When riding in an area where you might not easily be seen, such as desert terrain, mount a caution flag on the ATV.
  • Page 91 Select a large, flat, unpaved area to become famil- iar with your ATV. Make sure that this area is free of obstacles and other riders. You should practice control of the throttle, brakes, shifting procedures, and turning techniques in this area before trying more difficult terrain.

  • Page 92: Turning Your Atv

    As you approach a curve, slow down and begin to ECB00252 NOTICE turn the handlebars in the desired direction. As you do so, put your weight on the footboard to the Do not shift from low-range to high-range or outside of the turn (opposite your desired direc- vice versa without coming to a complete stop.

  • Page 93: Climbing Uphill

     Never operate the ATV on hills too steep for may continue to go straight. If the ATV doesn’t turn, come to a stop and then practice the proce- the ATV or for your abilities. The ATV can dure again. If the riding surface is slippery or overturn more easily on extremely steep hills loose, it may help to position more of your weight than on level surfaces or small hills.
  • Page 94 Do not attempt to climb hills until you have mas- tered basic maneuvers on flat ground. Always check the terrain carefully before attempting any hill. In all cases avoid inclines with slippery or loose surfaces, or obstacles that might cause you to lose control.

  • Page 95: Riding Downhill

    If you are climbing a hill and you find that you have straight uphill. Turn the ATV around and remount, not properly judged your ability to make it to the following the procedure described in the Owner’s top, you should turn the ATV around while you still Manual.
  • Page 96  Always check the terrain carefully before you Use caution while descending a hill with loose or start down any hill. slippery surfaces. Braking ability and traction may  Never operate the ATV on hills too steep for be adversely affected by these surfaces. Improper the ATV or for your abilities.

  • Page 97: Crossing A Slope

     Shift your weight to the uphill side of the ATV.  Never attempt to turn the ATV around on any hill until you have mastered the turning tech- nique as described in the Owner’s Manual on level ground. Be very careful when turning on any hill.

  • Page 98: Crossing Through Shallow Water

    The ATV can be used to cross slow moving, shal- low water of up to a maximum of 35 cm (14 in) in depth. Before entering the water, choose your path carefully. Enter where there is no sharp drop off, and avoid rocks or other obstacles which may be slippery or upset the ATV.
  • Page 99 braking ability. WARNING! Wet brakes may have reduced stopping ability, which could cause loss of control. [EWB02622] 1. Air filter case check hose After riding your ATV in water, be sure to drain the trapped water by removing the check hose at the bottom of the air filter case.

  • Page 100: Riding Over Rough Terrain

    1. Center storage compartment drain plug 1. V-belt case drain plug RIDING OVER ROUGH TERRAIN EWB01652 WARNING Riding improperly over obstacles could cause loss of control or a collision. Before operating in a new area, check for obstacles. Never at- tempt to ride over large obstacles, such as large rocks or fallen trees.

  • Page 101: Sliding And Skidding

    accident. Be sure to keep your feet firmly mounted To reduce the tendency for the front wheels to on the footboards at all times. Avoid jumping the slide in loose or slippery conditions, positioning ATV as loss of control and damage to the ATV may your weight over the front wheels will sometimes result.

  • Page 102: What To Do If

    WHAT TO DO...  If your ATV doesn’t turn when you want it to: Bring the ATV to a stop and practice the turning maneuvers again. Be sure you are putting your weight on the footboard to the outside of the turn.
  • Page 103  If your ATV is traversing a sloping surface: Be sure to ride with your weight positioned to- wards the uphill side of the ATV to maintain proper balance. If the ATV starts to tip, steer down the hill (if there are no obstacles in your way) to regain balance.

  • Page 104: Periodic Maintenance And Adjustment

    The intervals given in the periodic maintenance vice or while using the vehicle. If you are not fa- charts should be considered as a general guide miliar with vehicle service, have a Yamaha under normal riding conditions. However, DE- dealer perform the service.

  • Page 105: Owner's Manual And Tool Kit

    Make sure to protect the Owner’s Manual If you do not have the tools or experience required by putting it in the plastic bag, then by placing the for a particular job, have a Yamaha dealer perform bag in the document pouch. it for you.

  • Page 106: Periodic Maintenance Chart: Emission Control System

     For odometer or hour meter-equipped vehicles, follow the month maintenance interval if the ATV isn’t ridden for the stated distance or engine operating hours.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 107 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (150) (800) (1600) (1600) (3200) hours √ √ √ Spark arrester • Clean. • Check the air cut-off valve, reed valve, and hose Air induction sys- √...

  • Page 108: Periodic Maintenance Chart: General Maintenance And Lubrication

     For odometer or hour meter-equipped vehicles, follow the month maintenance interval if the ATV isn’t ridden for the stated distance or engine operating hours.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 109 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (150) (800) (1600) (1600) (3200) hours • Check operation and correct if necessary. • Check brake pedal free play and adjust if neces- √...
  • Page 110 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (150) (800) (1600) (1600) (3200) hours Shock absorber as- • Check operation and correct if necessary. √ √ √ semblies • Check for oil leakage and replace if necessary. •...
  • Page 111 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (150) (800) (1600) (1600) (3200) hours • Change. √ √ Final gear oil • Check ATV for oil leakage, and correct if neces- sary.
  • Page 112  Hydraulic brake service • Regularly check and, if necessary, correct the brake fluid level. • Every two years replace the internal components of the brake master cylinders and calipers, and change the brake fluid. • Replace the brake hoses every four years and if cracked or damaged.

  • Page 113: Removing And Installing Panels

    EBU23091 Removing and installing panels The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. 1. Panel E 2.
  • Page 114 Panel B To remove the panel 1. Remove panel A. 2. Remove the front carrier by removing the bolts. 1. Panel A To install the panel Place the panel in the original position. 1. Front carrier 2. Carrier bolt (upper) 9-11...
  • Page 115 1. Carrier bolt (under the fenders) 1. Panel B 2. Carrier bolt (lower) 2. Quick fastener 3. Projection 3. Remove the quick fasteners, pull panel B for- ward to release the projections, and then pull To install the panel the panel upward to remove it. 1.
  • Page 116 Panel C To remove the panel 1. Remove the seat. (See page 5-21.) 2. Remove panel A. 3. Remove the hoses from panel C. 2. Install the front carrier by installing the bolts and tightening them to the specified torques. Tightening torques: Carrier bolt (upper): 34 N·m (3.4 kgf·m, 25 lb·ft)
  • Page 117 1. Bolt 1. Screw 2. Quick fastener To install the panel 5. Remove the screws under the storage com- 1. Place the panel in the original position. partment lid, and then pull the panel upward to remove it. To ease removal of panel C, shift the drive select lever into the reverse position.
  • Page 118 2. Install the screws, quick fasteners, bolts, and hoses. Make sure that the hoses are properly connected and routed, and are not pinched. 3. Install panel A. 4. Install the seat. Panels D and E To remove a panel 1. Panel D 1.
  • Page 119 To install a panel Panels F and G 1. Place the panel in the original position, and To remove a panel then install the bolt. 1. Remove the panel bolts, footboard bolt, and footboard nut. 1. Panel F 2. Footboard nut 3.
  • Page 120 1. Panel G 2. Footboard nut 3. Footboard bolt 4. Panel bolt 5. Projection 2. Pull the panel downward while pushing the projection. To install a panel 1. Place the panel in the original position. 2. Install the bolts and nut, and then tighten them to the specified torques.

  • Page 121: Checking The Spark Plug

    Tightening torques: Panel bolt: 4.0 N·m (0.40 kgf·m, 3.0 lb·ft) Footboard nut: 4.0 N·m (0.40 kgf·m, 3.0 lb·ft) EBU38131 Checking the spark plug The spark plug is an important engine component, which is easy to check. Since heat and deposits will cause any spark plug to slowly erode, the 1.
  • Page 122 If the spark plug shows a distinctly different color, the engine could be operating improperly. Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check the vehicle. 1. Spark plug gap 2. Check the spark plug for electrode erosion...

  • Page 123: Engine Oil And Oil Filter Cartridge

    Tightening torque: Spark plug: If the engine was started before checking the oil 13 N·m (1.3 kgf·m, 9.6 lb·ft) level, warm up the engine, and then wait at least 10 minutes until the oil settles for an accurate reading. If a torque wrench is not available when installing 3.
  • Page 124 1. Engine oil dipstick 1. Maximum level mark 2. Minimum level mark 5. Insert the dipstick completely into the oil filler 6. If the engine oil is at or below the minimum hole, and then remove it again to check the oil level mark, add sufficient oil of the recom- level.
  • Page 125 1. Oil filter cartridge 2. Oil filter wrench An oil filter wrench is available at a nearby Yamaha 1. Engine oil drain bolt dealer. 2. Gasket 8.
  • Page 126 1. O-ring 1. Torque wrench Tightening torque: Oil filter cartridge: Make sure that the O-ring is properly seated. 17 N·m (1.7 kgf·m, 13 lb·ft) 9. Install the new oil filter cartridge with an oil fil- 10. Install panel F. ter wrench, and then tighten it to the specified 11.

  • Page 127: Why Yamalube

    Be sure to wipe off spilled oil on any parts after the Why Yamalube engine and exhaust system have cooled down. YAMALUBE oil is a Genuine YAMAHA Part born of the engineers’ passion and belief that engine oil is ECB00301 an important liquid engine component.

  • Page 128: Final Gear Oil

    1. Final gear oil age before each ride. If any leakage is found, have 2. Gasket a Yamaha dealer check and repair the ATV. In ad- 3. Final gear oil level check bolt dition, the final gear oil level must be checked and 4.
  • Page 129 To change the final gear oil 1. Park the ATV on a level surface. 2. Place an oil pan under the final gear case to collect the used oil. 3. Remove the final gear oil filler bolt, the final gear oil level check bolt, the final gear oil drain bolt and their gasket to drain the oil from the final gear case.

  • Page 130: Differential Gear Oil

    The differential gear case must be checked for oil leakage before each ride. If any leakage is found, 1. Final gear oil have a Yamaha dealer check and repair the ATV. 2. Gasket In addition, the differential gear oil level must be 3.
  • Page 131 To check the differential gear oil level 5. Install the oil filler bolt and its gasket, and then 1. Park the ATV on a level surface. tighten the bolt to the specified torque. 2. Remove the differential gear oil filler bolt and Tightening torque: its gasket, and then check the oil level in the Differential gear oil filler bolt:...

  • Page 132: Coolant

    4. Install the drain bolt and its new gasket, and Recommended differential gear oil: then tighten the bolt to the specified torque. See page 11-1. Tightening torque: 6. Check the oil filler bolt gasket for damage, Differential gear oil drain bolt: and replace it if necessary.
  • Page 133 1.99 L (2.10 US qt, 1.75 Imp.qt) The coolant should be between the minimum and If genuine Yamaha coolant is not available, use an maximum level marks. ethylene glycol antifreeze containing corrosion in- hibitors for aluminum engines and mix with dis- tilled water at a 1:1 ratio.
  • Page 134 0.24 L (0.25 US qt, 0.21 Imp.qt) a Yamaha dealer check the antifreeze con- tent of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced.
  • Page 135 EBU34213 To change the coolant EWB01891 WARNING Wait for the engine and radiator to cool before removing the radiator cap. You could be burned by hot fluid and steam blown out under pressure. Always place a thick rag over the cap when opening.
  • Page 136 1. Radiator cap 1. Coolant drain bolt 2. Gasket 5. Place a container under the engine, and then remove the coolant drain bolt and its gasket. (Use a trough or a similar object as shown to prevent coolant from spilling on the engine guard.) 1.
  • Page 137 6. Place a container under the coolant reservoir Tightening torque: to collect the used coolant. Coolant drain bolt: 7. Remove the coolant reservoir cap. 10 N·m (1.0 kgf·m, 7.4 lb·ft) 8. Disconnect the coolant reservoir hose on the coolant reservoir side, and then drain the 11.
  • Page 138 15. When coolant begins to flow out of the bolt 18. Loosen the cylinder head air bleed bolt, with- hole, tighten the water pump air bleed bolt to out removing it, to allow all of the air to es- the specified torque. cape from the air bleed bolt hole.
  • Page 139 24. Start the engine, and then check for coolant leakage. If any leakage is found, have a Yamaha dealer 1. Footboard nut check the cooling system. 2. Footboard bolt A 3.

  • Page 140: Cleaning The Air Filter Element

    EBU34233 Cleaning the air filter element The air filter element should be cleaned at the in- tervals specified in the periodic maintenance and lubrication chart. Clean or replace the air filter ele- ment more frequently if you ride in unusually wet or dusty areas.
  • Page 141 2. Remove the seat. (See page 5-21.) 3. Remove the air filter case cover by unhooking the air filter case cover holders. 1. Air filter element 5. Pull off the air filter element lock plate, and then remove the sponge material from the air 1.
  • Page 142 2. Sponge material damaged. 3. Air filter element lock plate 9. Apply Yamaha foam air filter oil or other qual- 6. Wash the sponge material gently but thor- ity foam air filter oil to the sponge material. oughly in solvent. WARNING! Always use parts cleaning solvent.

  • Page 143: Cleaning The Spark Arrester

    case. Never operate the engine with the air filter element removed. Doing so would al- low unfiltered air to enter the engine, caus- ing rapid engine wear and possible engine damage. Additionally, the fuel injection system would be affected resulting in poor engine performance and possible over- heating.

  • Page 144: V-Belt Case Drain Plug

    V-belt case, remove the V-belt case drain plug to drain the water from the case. If water drains from the V-belt case after removing the plug, have a Yamaha dealer check the ATV as the water may affect other engine parts. 9-41...

  • Page 145: Adjusting The Throttle Lever Free Play

    The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the inter- vals specified in the periodic maintenance and lu- 1. Rubber cover brication chart.

  • Page 146: Checking The Front And Rear Brake Pads

    Yamaha dealer replace the brake pads as a set. 1. Wear indicator groove The wheels need to be removed to check the Rear brake brake pads.

  • Page 147: Checking The Brake Fluid Level

    Rear brake EBU29845 Checking the brake fluid level Before riding, check that the brake fluid is above the minimum level mark. Replenish the brake fluid if necessary. Straighten the handlebars for an accurate reading. Front brake 1. Minimum level mark Specified brake fluid: DOT 4 ECB01161...

  • Page 148: Changing The Brake Fluid

    EBU24293 Changing the brake fluid leakage. If the brake fluid level suddenly goes Have a Yamaha dealer change the brake fluid at down, have a Yamaha dealer check the brake sys- the intervals specified in the periodic maintenance tem before further riding.

  • Page 149: Checking The Front And Rear Brake Lever Free Play

    Front brake 1. No brake lever free play There should be no free play at the brake lever end. If there is free play, have a Yamaha dealer in- spect the brake system. 1. No brake lever free play 9-46...

  • Page 150: Adjusting The Brake Pedal Free Play

    1. Remove panel G. (See page 9-10.) EBU29077 Adjusting the brake pedal free play 2. Loosen the locknut. 3. Turn the brake pedal free play adjusting nut in direction (a) to increase the free play, and in direction (b) to decrease it. 1.

  • Page 151: Axle Boots

    Check the axle boots for tears or damage. If any damage is found, have them replaced by a Yamaha dealer. 1. Brake pedal cable joint 2. Slight play (0.1–0.5 mm [0.004–0.02 in]) 6.

  • Page 152: Checking And Lubricating The Cables

    If a cable is damaged or does not move The operation of the front and rear brake levers smoothly, have a Yamaha dealer check or replace should be checked before each ride, and the lever pivots should be lubricated if necessary.

  • Page 153: Checking And Lubricating The Brake Pedal

    Front brake lever EBU28833 Checking and lubricating the brake pedal The operation of the brake pedal should be checked before each ride, and the pedal pivot should be lubricated if necessary. To access the brake pedal pivot, remove panel G. (See page 9-10.) Recommended lubricant: Lithium-soap-based grease...

  • Page 154: Checking The Wheel Hub Bearings

    If there is play in a wheel hub or if a wheel does not turn smooth- ly, have a Yamaha dealer check the wheel hub bearings. EBU25054 Lubricating the rear knuckle pivots...

  • Page 155: Lubricating The Steering Shaft

    (valve-regulated lead-acid) battery. There is no The steering shaft must be lubricated by a need to check the electrolyte or add distilled wa- Yamaha dealer at the intervals specified in the pe- ter. However, the battery lead connections need riodic maintenance and lubrication chart.
  • Page 156 2. Remove the front carrier by removing the  It is recommended to have the battery serviced bolts. by a Yamaha dealer. EWB02161 WARNING Battery electrolyte is poisonous and danger- ous, as it contains sulfuric acid, which can cause severe burns.
  • Page 157 1. Carrier bolt (under the fenders) 1. Battery holding plate 2. Carrier bolt (lower) 2. Nut 3. Negative battery lead (black) 3. Remove the battery holding plate by remov- 4. Positive battery lead (red) ing the nuts. 5. Pull the battery out of its compartment. 4.
  • Page 158  Select a suitable charger and follow the manu- To install the battery facturer’s instructions. 1. Place the battery in its compartment. 2. Connect the positive battery lead first, then ECB00933 NOTICE connect the negative battery lead by installing their bolt. NOTICE: When installing the bat- To charge a VRLA (valve-regulated lead-acid) battery, a special battery charger is required.

  • Page 159: Replacing A Fuse

    EBU30525 Tightening torques: Replacing a fuse Carrier bolt (upper): 34 N·m (3.4 kgf·m, 25 lb·ft) Carrier bolt (lower): 34 N·m (3.4 kgf·m, 25 lb·ft) Carrier bolt (under the fenders): 7 N·m (0.7 kgf·m, 5.2 lb·ft) 5. Install the panel.  Make sure the positive and negative battery leads are installed as shown.
  • Page 160 2. Remove panel A. (See page 9-10.) 3. Remove the blown fuse, and then install a new fuse of the specified amperage. WARNING! Always use a fuse of the spec- ified rating, and never use a substitute ob- ject in place of the proper fuse. An improper fuse or a substitute object can cause damage to the electrical system, which could lead to a fire.

  • Page 161: Replacing A Headlight Bulb

    40.0 A Left and right headlights Headlight fuse: This model is equipped with LED-type headlights. 10.0 A If a headlight does not come on, have a Yamaha Ignition fuse: dealer check the vehicle and replace the headlight 10.0 A if necessary.
  • Page 162 3. Remove the socket by pushing it in and turn- ing it counterclockwise. 1. Handlebar-mounted light cover 2. Quick fastener 1. Socket 2. Remove the bulb cover by pulling it off. 4. Remove the burnt-out bulb. 5. Place a new bulb into position. NOTICE: Do not touch the glass part of the bulb.

  • Page 163: Adjusting A Headlight Beam

    8. Install the handlebar-mounted light cover as NOTICE shown, and then install the quick fasteners. It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, turn the headlight beam adjusting screw in direction (a).

  • Page 164: Brake/Tail Light

    Brake/tail light This model is equipped with an LED type of brake/tail light. If the brake/tail light does not come on, have a Yamaha dealer check it. EBU25653 Removing a wheel 1. Park the ATV on a level surface. 2. Loosen the wheel nuts.

  • Page 165: Installing A Wheel

    EBU36243 Installing a wheel 1. Install the wheel with the arrow mark pointing in the forward rotating direction of the wheel, and then install the wheel nuts. 1. Tapered nut 2. Lower the ATV to the ground. 3. Tighten the wheel nuts to the specified torques.

  • Page 166: Troubleshooting

    The following troubleshooting charts represent quick and easy procedures for checking these vi- tal systems yourself. However, should your ATV require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the ATV properly.

  • Page 167: Troubleshooting Charts

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the ATV. Check the compression. 4. Compression The engine does not start. There is compression.
  • Page 168 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK.  Tap water can be used in an emergency. Change to the recommended coolant as soon as possible.

  • Page 169: Cleaning And Storage

    EBU25861 CLEANING AND STORAGE and deterioration of wheel bearings, EBU25882 Cleaning brakes, transmission seals and electrical Frequent, thorough cleaning of your ATV will not devices. Many expensive repair bills have only enhance its appearance but will improve its resulted from improper high-pressure de- general performance and extend the useful life of tergent applications such as those avail- many components.

  • Page 170: Storage

    4. Perform the following steps to protect the en- EBU27264 Storage gine from internal corrosion. a. Remove the spark plug cap and spark Short-term plug. Always store your ATV in a cool, dry place and, if b. Pour a teaspoonful of engine oil into the necessary, protect it against dust with a porous spark plug bore.
  • Page 171 8. Remove the battery and fully charge it. (See page 9-52.) 10-3...

  • Page 172: Specifications

    EBU25964 SPECIFICATIONS Weight: EBU38810 Curb weight: 313.0 kg (690 lb) (BDE3) 325.0 kg (716 lb) (BDE2) The 4-digit model type code can be confirmed by 330.0 kg (728 lb) (BDE7, BDEA, BDEE) 342.0 kg (754 lb) (BDEK) checking the model label. (See page 1-1.) 354.0 kg (780 lb) (BDEJ) Loading: Dimensions:...
  • Page 173 Lubrication system: Final gear oil: Wet sump Type: Engine oil: Yamaha Friction Modified Plus Shaft Drive Oil (Part No.: Recommended brand: ACC-SHAFT-PL-32) or SAE 80 API GL-4 Hypoid gear oil Quantity: 0.20 L (0.21 US qt, 0.18 Imp.qt) Differential gear oil:...
  • Page 174 Quantity: Drivetrain: 0.21 L (0.23 US qt, 0.19 Imp.qt) Primary reduction ratio: Coolant quantity: 1.000 Radiator (including all routes): Secondary reduction ratio: 1.99 L (2.10 US qt, 1.75 Imp.qt) 10.142 (41/21 x 17/12 x 20/15 x 33/12) Coolant reservoir (up to the maximum level mark): Final drive: 0.24 L (0.25 US qt, 0.21 Imp.qt) Shaft...
  • Page 175 Manufacturer/model: With cargo or trailer (For Europe): MAXXIS/MU01Y (BDEJ, BDEK) Recommended: MAXXIS/MU06Y (BDE2, BDE7, BDEA, BDEE, BDE3) Front: Tire air pressure (measured on cold tires): 50.0 kPa (0.500 kgf/cm², 7.3 psi) Rear: Recommended (For Oceania): 50.0 kPa (0.500 kgf/cm², 7.3 psi) Front: Minimum: 35.0 kPa (0.350 kgf/cm², 5.0 psi)
  • Page 176 Spring: Handlebar-mounted light: Coil spring T15H, 35.0 W/36.5 W Shock absorber: Brake/tail light: Hydraulic damper Wheel travel: Meter lighting: 193 mm (7.6 in) Rear suspension: Neutral indicator light: Type: High beam indicator light: Double wishbone Spring: Reverse indicator light: Coil spring Shock absorber: Coolant temperature warning light: Hydraulic damper...
  • Page 177 Headlight fuse: number of machines and other adjacent process- 10.0 A es, and the length of time for which an operator is Signaling system fuse: exposed to the noise. Also the permissible expo- 10.0 A sure level can vary from country. This information, Ignition fuse: however, will enable the user of the machine to 10.0 A...

  • Page 178: Consumer Information

    EBU26004 CONSUMER INFORMATION Your Yamaha engine was designed and tested to EBU38690 Emissions Certification label (for Eu- give an optimal blend of performance without ex- rope) cessive emissions. Therefore, do not attempt to This engine conforms to the Non-Road Mobile...

  • Page 179: Index

    INDEX Drive select lever ............5-18 Drive select lever and driving in reverse ......7-2 Accessories and loading ..........7-5 Accessories, DC jack ........... 5-29 Air filter element, cleaning ........... 9-37 Emissions Certification label (for Europe) ....12-1 Axle boots ..............9-48 Engine break-in ..............
  • Page 180 Spark arrester, cleaning ..........9-40 Spark plug, checking ........... 9-18 Label locations ...............2-1 Specifications .............. 11-1 Light switch ..............5-12 Speed limiter ..............5-16 Low-range indicator light ..........5-2 Stabilizer bushes, checking ......... 9-51 Starting the engine ............7-1 Main switch ..............5-1 Start switch ..............
  • Page 182 EBU26173 WARNING Improper ATV use can result in SEVERE INJURY or DEATH. NEVER USE ALWAYS USE NEVER USE NEVER CARRY AN APPROVED PASSENGERS WITH DRUGS ON PAVED HELMET AND OR ALCOHOL ROADS PROTECTIVE GEAR NEVER ALWAYS operate: • without proper training or instruction. •...

This manual is also suitable for:

Grizzly yfm70gpslGrizzly yfm700fwad

Table of Contents