Programming Procedure; Opening The Unit And Access The Keyboard; Entering Keyboard Programming - Bosch Carephone 62 CRS-H62M-GB User Manual

22 en | Programming
6.2

Programming procedure

6.2.1

Opening the unit and access the keyboard

To access the keyboard, open the unit by lifting the top cover.
NOTICE!
A quick programming guide is provided on the back side of the
cover of the unit. It is intended for experienced users who are
familiar with programming the Carephone 62.
6.2.2

Entering keyboard programming

1.
2.
3.
4.
5.
6.
F.01U.141.162 | V6 | 2015.04
On the keyboard, press P at least one second. The unit
announces "Setup" and the version.
Enter the Personal Identification Number (PIN). The PIN
factory setting is 246810. If the PIN is entered correctly,
the unit announces "Selection".
On the keyboard, enter the programming step you wish to
change. The steps can be carried out in any order.
Enter the new setting as required.
Press C to confirm your entries. The Carephone 62
automatically goes to the next programming step or
substep.
To leave the programming mode, press **.
User Manual
Carephone 62
TeleAlarm