Programming With The Microsd Memory Card - Bosch Carephone 62 CRS-H62M-GB User Manual

Table of Contents

Advertisement

44
en | Additional Devices
7.5.2

Programming with the microSD memory card

Programming the Carephone 62 with the microSD memory card
consists of calling up different programming functions. These
programming functions are executed with special key
combinations.
NOTICE!
Before programming with the microSD memory card, make sure
that the Carephone 62 is connected to the mains with the
power supply unit.
Press the key combination of your choice and the unit will
perform the function associated to it.
NOTICE!
Before reading from the microSD memory card, make sure that
it contains a file. Before writing to the microSD memory card,
make sure that it is not write-protected. Existing files with same
names will be overwritten.
Read settings from the microSD memory card to the
Carephone 62:
Function
Read factory settings
Read user settings
Read firmware
Restricted read user settings
(programming steps 30, 47, 49
and 91 are not modified)
NOTICE!
After reading the firmware to the Carephone 62 (key
combination P, F and 3), make sure to perform a test alarm.
See Section 8.4 Test instructions, page 51.
F.01U.141.162 | V6 | 2015.04
Press together for at least 2 seconds:
P, F and 1
P, F and 2
P, F and 3
P, F and 4
User Manual
Carephone 62
TeleAlarm

Advertisement

Table of Contents
loading

Table of Contents