Bosch Carephone 62 CRS-H62M-GB User Manual page 32

32 en | Programming
72 Activate output
The Carephone 62 provides a potential-free relay output with a normally
open switch contact. The way the output reacts can be programmed.
– 0 = off
– 1 = speak / listen connection and repeated emergency call
– 3 = outgoing emergency call
– 4 = incoming call recognition
– 5 = wireless transmitter
– 6 = remote activation
– 7 = speak / listen connection
– 8 = pre-alarm
– 9 = pre-alarm and speak / listen connection
– Default value is 0.
73 Assign input
The Carephone 62 provides external inputs. The function assigned can be
programmed:
– 0 = external activity monitor reset
– 1 = emergency call button
– 2 = service call
– 3 = external input
– 9 = fire alarm
– B = motion detection
– Default value is 0.
After your choice, the input can be chosen as a:
– 0 = normally open contact (closing)
– 1 = normally closed contact (opening)
74 Silent alarm
The Carephone 62 can send silent alarms. When this is activated, the
loudspeaker of the Carephone 62 is turned off. Only the microphone
remains active.
– 0 = off, 1 = on. Default value is 0.
F.01U.141.162 | V6 | 2015.04 User Manual
Carephone 62
TeleAlarm