BLADEZ SX6i Owner's Manual page 16

STEP 7
Pull the pulse sensor cable up to the console
mount using the guide wire, which is secured
to the top of the Upright Tube (68). Mount
the Fixed Handlebar (71), using Metal Bracket
(A), to the mounting bracket located at the top
portion of the Upright Tube (68) using the hex
head bolts (6) supplied. Enclose the mounting
holes and bolts by interlocking the Upper cover
(88A) and lower cover (88B). Securing them
both using the screw (61) provided.
STEP 8
Attach the (left) handlebar (72) and (right)
handlebar (73) to the top of the corresponding
swivel tube. Secure the attached members using
the screws (18) supplied then place the end caps
(98) over the holes.
16