Telematrix SP-300 Spectrum PLUS User Manual page 25

Programming A Pause into Memory
Pause(s) can be programmed into the speed dial. This function allows the user to delay the dia l-
ing pattern of a number. This function may be required for accessing line features provided by
your telephone system or local telephone company. For example, a speed dial number may need
to pause during its dialing sequence to insure proper connections.
Programming the Pause Time
To Program the Timing of the Pause
T M
The SpectumPlus Telephone allows you to program the timing of the Pause delay. The op-
tions are 1.0 seconds, 2.0 seconds, 3.6 seconds and 4.0 seconds. To change the timing:
1. Position the handset in the off-hook position (lift handset)
Press the "STORE" key.
2.
Press the folowing keys on the keypad in the order shown.
3.
For 1.0 seconds, press "#", "1", "0", "#"
For 2.0 seconds, press "#", "2", "0", "#"
For 3.6 seconds, press "#", "3", "6", "#"
For 4.0 seconds, press "#", "4", "0", "#"
4. Place the handset to the on-hook position.
Programming Pause Into Voice Mail
To Program A Timed Pause
To store a Pause into Voice Mail memory,
1.
simply press the Pause key in the number-
ing sequence when programming speed
dial memory keys. See the following page
for programming speed dial.
Using A Pause When Dialing
To use a Pause, simply press the Pause key at the appropriate point in the number sequence being
dialed from the key pad.
NOTE: Each "Pause" function counts as 1 digit when stored into a speed dial memory location..
NOTE: The default Pause timing is
2.0 Seconds. A multiple of Pauses
can be programmed into speed dial
25
memory to increase the delay.