Robotic Torch Maintenance Center Maintain high quality and productivity in your MIG robotic welding cell with the Power REAM from Lincoln Electric. This automatic nozzle cleaning station removes and reduces spatter accumulation for improved performance. The Power REAM clamps the torch nozzle firmly in place while a constant torque air-motor drives a high-speed reamer, cutting away spatter from the nozzle, contact tip, and gas diffuser.
A CLOSER LOOK PERFORMANCE The Power REAM controls the entire reaming process with its internal microcontroller. Every aspect of the reaming cycle is commanded, monitored and checked by the controller. The feedback signal to the robot is a true “complete” signal indicating that the entire sequence has been executed without error.
RECOMMENDED OPTIONS GENERAL OPTIONS Power Ream Robot Cable 20 feet (6.0m) replacement control cable. Reamer side has a thread on connector. Controller side has stripped wires for connection to a terminal strip. Order K2433-1 Remote Power Ream Reservoir Kit Includes mounting bracket and fittings to remount the anti-spatter spray reservoir from the top of the reamer to another location within the robotic cell.
On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice.