Managing Multiple Audio Inputs To The Udirect 3 - Unitron uDirect 3 Manual

Managing multiple audio inputs to the
uDirect 3
When an audio source
is connected via the
uDirect 3, your hearing
aids will automatically
switch to special
programs.
It is possible to have multiple audio sources
connected and in operation with the uDirect 3:
Two Bluetooth devices (e.g., phone and
•
uTV 3)
One audio input (3.5 mm audio plug)
•
One direct audio input (Europlug)
•
Spoken status indicators and the audio
indicator light inform you about the connected
inputs.
An audio source is considered as "connected"
to the uDirect 3 if:
The audio plug is inserted (with or without
•
audio signal)
50
Previously-active
hearing program
3.5 mm plug Bluetooth
(audio jack) music 1
FM Bluetooth
Europlug music 2
An FM receiver is inserted and receiving
•
an FM signal
A Bluetooth music source is streaming
•
music or paused
A Bluetooth phone is paired and within
•
reach
A phone call always has priority. You will hear
the ringing indication even when listening to
other audio sources via cable, Bluetooth or FM.
If you reject or terminate the call, audio
streaming will resume.
It is not possible to change hearing aid programs
using the access ( ) button as long as any
audio source is connected to the uDirect 3.
If you want to listen to music from your
connected mobile phone, you must start the
music via your phone initially; it cannot be
started from the uDirect 3.
51