Managing Multiple Audio Inputs To The Udirect 2 - Unitron uDirect 2 Manual

Managing multiple audio inputs to the
uDirect 2
When an audio source is connected via the
uDirect 2, your hearing aids will automatically
switch to special programs.
Up to 4 automatic programs can be fine-tuned
by your hearing healthcare professional.
It is possible to have multiple audio sources
connected and in operation with the uDirect 2:
• Two Bluetooth devices
(e.g., phone and uTV 2)
• One audio input (3.5 mm audio plug)
• One FM receiver
Spoken status indicators and the audio
indicator light inform you about the connected
inputs.
An audio source is considered as "connected" to
the uDirect 2 if:
• The audio plug is inserted (with or without
audio signal)
36
• An FM receiver is inserted and receiving an
FM signal
• A Bluetooth music source is streaming music
or paused
• A Bluetooth phone is paired and within reach
A phone call always has priority. You will hear
the ringing indication even when listening to
other audio sources via cable, Bluetooth or
FM. If you reject or terminate the call, audio
streaming will resume.
It is not possible to change hearing aid
programs using the access ( ) button as
long as any audio source is connected to the
uDirect 2.
Most Bluetooth phones connect to the uDirect 2
as a phone and a music player at the same time.
If you want to listen to music, you must start the
music via your phone; it cannot be started from
the uDirect 2.
37