Disassembly; Removing And Replacing The Battery Cover And Battery - Motorola U6 Service Manual

Digital wireless telephone gsm 900/1800/1900 or 850/1800/1900 gprs

Hide thumbs Also See for U6:

Table of Contents

Disassembly

This section provides instructions for the disassembly of U6 telephones. Tools and

equipment used for the phone are listed in Table 1, preceding.

Many of the integrated devices used in these phones are vulnerable to damage from

ESD. Ensure adequate static protection is in place when handling, shipping, and

servicing the internal components of this phone.

Avoid stressing the plastic in any way to avoid damage to either the plastic or

internal components.

All batteries can cause property damage and/or bodily injury, such as burns, if a

conductive material, such as jewelry, keys, or beaded chains, touches exposed

terminals. The conductive material may complete an electrical circuit (short circuit)

and become very hot. Use care in handling any charged battery, particularly when

placing it inside a pocket, purse, or other container with metal objects.

Ensure the phone is turned off.

Press down on the battery latch and slide the battery cover as shown in Figure

1 then lift it off the phone.

Battery Latch

Figure 1. Removing the Battery Cover

Lift the side edge of the battery up and out of the battery compartment.

March 06, 2006

Battery Cover

U6 GSM

040939o

6809493A67-O

Table of Contents