Removing And Replacing The Rear Housing - Motorola V360 Service Manual

Disassembly

Removing and Replacing the Rear Housing

G
G
24
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, SIM, and antenna cap as described in the
procedures.
In addition to 4 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2. Using a Torx driver with a T-6 bit, remove the 4 screws at each corner of the
phone. Retain the screws for reassembly. See Figure 5.
Figure 5. Removing the rear housing screws
May 18, 2005
Housing Screw
Housing Screw
Housing Screw
Housing Screw
V360
050321o
6809493A69-O