Comfort Glow CSBNT Owner's Operation And Installation Manual page 13

Slot on Inside
Rod with
Left Front of
Screen
Stove
Assembled
Figure 13 - Installing Screen Into Stove
(View From Back of Stove)
INSTALLING LOG SET
1. Set one piece log on heater base as
shown in Figure 14. Make sure middle
section at bottom of log is seated into "U"
shaped cutout in center of heater base.
Log will fit securely on base.
IMPORTANT: Make sure log does not
cover any burner ports and does not touch
the stove cavity (see Figure 14).
2. Fasten back panel to stove with 4 bolts
and washers removed in step 4 of Un-
packing, page 8. Make sure product iden-
tification label is located on the outside
lower left hand corner.
3. Place freestanding stove in desired posi-
tion being careful not to damage gas con-
nections. Be sure to maintain clearances
to combustibles and wall clearances as
outlined on page 9.
111487-01G
INSTALLATION
Continued
One-Piece
Hole on Inside
Log Set
Right Front of
Stove
Safety
Pilot
Location
www.desatech.com
Heater
Base
Figure 14 - Installing One-Piece Stove
Log Set
One-Piece
Log Set
Figure 15 - Top View of One-Piece Log
Set on Gas Log Heater
Middle Section
at Bottom of
Log Set
Burner
"U" Shaped
Cutout in
Chassis
Burner Porting Areas
(double slotted
rectangular openings
13