Lincoln Electric CLASSIC I SVM134-A Service Manual page 87

F-43
FIGURE F.21 – BRUSH BRACKET WRAP-AROUND COVER
27. Using the slot head screw driver, remove the
two screws and nuts from the brush bracket
wrap-around cover. Remove the cover. See
Figure F.21.
FIGURE F.22 – MAIN GENERATOR BRUSH BRACKET CLAMPING BOLT
28. Lift the eight brushes from the main commu-
tator. Note their positions for reassembly.
TROUBLESHOOTING & REPAIR
MAIN GENERATOR FRAME REMOVAL
AND REPLACEMENT (continued)
CLAMPING BOLT
CLASSIC I
BRUSH BRACKET
REMOVE (2) NUTS,
WASHERS, AND SCREWS
WRAP- AROUND COVER
BRUSHES (8)
BRUSH BRACKET
29. Using the 7/16" wrench, loosen (do not
remove) the main generator brush bracket
clamping bolt. Note the position of the drill
spot for reassembly. See Figure F.22.
F-43