Terminal Command Only; Over Range Error; Logic Error Warning; Only Changed In Standby/Read Only Parameter - Adleepower AP2G3-137 Instruction Manual

Terminal command only

OPE4
Accept run command from control terminal only.
Not operation panel.
See functions description CD12

Over range error

OPE5
Operating error message ~ over range.

Logic error warning

OPE6
Logic error when setting.
EXAMPLE : Setting F-min > F-max will result an error.
Only changed in standby
OPE7
The parameter can only be changed in standby mode.
Read only parameter
OPE8
The parameter created by system. Unable to be changed by user.
75