Paradyne BitStorm 2600 IP DSLAM Installation Manual page 52

A. Connectors and Pin Assignments
ALARM Connector
The alarm relay reports major alarms through the ALARM connector.
Table A-7. ALARM Connections
The alarm contacts are closed during normal operation. They open in response to
loss of power, hardware failure, or other alarm conditions. The maximum rated
load for the alarm relays is:
A-6
Signal
Major Alarm
Common
Minor Alarm
Alarm Sense +
Alarm Sense –
30 VDC: 1.0 Amp
60 VDC: 0.6 Amp
60 VAC: 0.6 Amp
April 2005
Direction Contact
Out 1
Out 2
Out 3
In 4
In 5
5 4 3 2 1
ALARM
03-17453
2600-A2-GN20-50