Configuration
Overview
The BitStorm 2600 is designed to require minimal configuration before it can be
accessed by a Network Operations Center (NOC). When the BitStorm 2600 is first
powered up it is a fully functional bridge, and all DSL ports are set to their
maximum speed.
Initial configuration is performed using the Command Line Interface (CLI). The CLI
is available from a terminal or PC connected to the CONSOLE port.
Additional configuration may be necessary, depending on the mode used to
manage the BitStorm 2600:
This can be performed using the CLI, SNMP, or the web interface.
For more configuration information, see the
IP DSLAM Command Line Interface Reference
(for the web interface).
2600-A2-GN20-50
Inband
Out of band through Port 1
April 2005
BitStorm 2600 and GranDSLAM 4200
(for the CLI) and the online Help
4
4-1
Need help?
Do you have a question about the BitStorm 2600 IP DSLAM and is the answer not in the manual?