Brinkmann Select 810-6680-S Owner's Manual page 33

Warming
Rack
Sear Burner
Cooking Grill
Heat Distribution
Plates
Figure 1
Figure 2
Cooking
Grates
Igniter Cap
+
- Battery
Sear-X Battery
Compartment
Sleeve
Step 25
Place the heat distribution plates
and stainless steel sear burner
heat distribution plate on lower
level of grill body assembly
directly above burners.
Step 26
Place cooking grills and
sear burner cooking grill on
support ribs directly above heat
distribution plates.
Step 27
Insert warming rack onto brackets
so it sits above the cooking grills.
Step 28
Remove igniter cap and insert
a battery with the end of battery
toward igniter cap.
Ensure spring is in place inside
igniter cap. Replace igniter cap
and make sure the igniter is
working properly (Figure 1).
Place three batteries into the
Sear-X battery compartment, and
slide compartment into the sleeve
on the inside left panel. (Figure 2).
32