Table of Contents
Advertisement
Figure A-2.
2.
Connect the VIDEO OUT on the CRX-500 Unit to the Video Input on the
UCT-100 Data Transmitter Unit. If the CRX-500 unit is addressed 1,
connect to video input 1; if the CRX-500 unit is addressed 5, connect to
video input 5, etc.
3.
Refer to the UCT-100 Data Transmitter Manual for installing the UCT-100
Data Transmitter. Note: The CRX-500 Units can be placed wherever a
dome is discussed in the UCT-100 Data Transmitter manual.
OPTION B1 OR B2 INSTALLATION
A-4
Advertisement
Table of Contents
