2.5
SETUP PROCEDURES
Figures 2-1 and 2-2 show the location of various components on the mother
board, part number 517484-XXXX (all models), and the expansion board, part
number 517482-1040 (Model CRX-502 and CRX-520 only) that may or may not
need to be setup prior to power up of the system.
Make Sure That The Power Input Is Correct
For The Receiver Unit. Make Sure That The
Camera Power Is Setup Correctly. If Either
Of The Above Are Not Configured Correctly,
Equipment Damage May Occur.
CAUTION
2-5