Table of Contents
Advertisement
2.5.1
120 Vac or 220 Vac Input Power.
The input power for the control receiver is configured at the factory. There
is no setup on the mother board for input power. However, Model CRX-502
and CRX-520 Receivers have an expansion board that has jumpers that
must be in the correct positions for 120 Vac or 220 Vac input power.
Model CRX-502
and CRX-520
Power
120 Vac
220 Vac
WARNING
ENSURE POWER IS DISCONNECTED FROM
THE CONTROL RECEIVER.
INJURY
COULD
ELECTRICAL SHOCK.
Expansion Board
Jumpers
W1
In
Out
PERSONNEL
RESULT
W2
W3
In
Out
Out
In
2-8
FROM
Advertisement
Table of Contents
