Icom IP100H Demonstration Setup Manual page 18

DGX-IP1000C/IP100H -V1.0
STEP 1 STEP 2
STEP 6: DEMONSTRATION [Talk between TR 1 and TR 2]
TR 1
(1) Turn ON the IP100H's power (TR 1 and TR 2).
NOTE: When connection is finished,
If the icon does not appear on the display, check the following items.
• Check the access point setting.
• Check the IP100H's cloning setting.
• Check the IP1000C's setting.
(2) Hold down TR 1's [PTT], and then speak into the microphone at a normal voice level.
Your voice is heard from TR 2's speaker.
After speaking, release [PTT] to listen.
(3) Hold down TR 2's [PTT], and then speak into the microphone at a normal voice level.
Your voice is heard from TR 1's speaker.
After speaking, release [PTT] to listen.
CONVENIENT!
When you use the IP100H with optional HM-153LS or HM-166LS EARPHONE-MICROPHONE, you can use
the IP100H in hand-free operation (full duplex mode).
Taking and Listening
STEP 3
Access point
IP Network
IP1000C
icon appears on the display.
Full duplex communication can be made !
Access
point
IP100H (TR 1)
IP1000C
15
STEP 4 STEP 5
TR 2
IP100H (TR 2)
Taking and Listening
STEP 6