Icom IP100H Demonstration Setup Manual page 11

DGX-IP1000C/IP100H -V1.0
STEP 1
STEP 5: DEMONSTRATION [Talking between TR 1 and TR 2]
(1) Turn ON the IP100H's power (TR 1 and TR 2).
NOTE: When connection is finished,
If the icon does not appear on the display, check the following items.
• Check the access point setting.
• Check the IP100H's cloning setting.
• Check the IP1000C's setting.
(2) Hold down TR 1's [PTT], and then speak into the microphone at a normal voice level.
Your voice is heard from TR 2's speaker.
After speaking, release [PTT] to listen.
(3) Hold down TR 2's [PTT], and then speak into the microphone at a normal voice level.
Your voice is heard from TR 1's speaker.
After speaking, release [PTT] to listen.
CONVENIENT!
When you use the IP100H with optional HM-153LS or HM-166LS EARPHONE-MICROPHONE, you can use
the IP100H in hand-free operation (full duplex mode).
Talking and Listening
STEP 2
Access point
TR 1
icon appears on the display.
Full duplex communication can be made !
IP100H (TR 1)
STEP 3
IP1000C
Access
point
IP100H (TR 2)
Talking and Listening
IP1000C
8
STEP 4
TR 2
STEP 5