Icom IP100H Demonstration Setup Manual page 13

DGX-IP1000C/IP100H -V1.0
STEP 1 STEP 2
STEP2: CONNECTION EXAMPLE
See each equipment's instruction manual for connection details.
DHCP Server
Access point
Ask your system
administrator for the IP
address and subnet
mask.
IP100H (TR 1)
DHCP Client: Enable
STEP 1 STEP 2
STEP3: ACCESS POINT SETTINGS
Ask your system administrator for the access point's IP address, and then enter it into the access point field,
and then set the SSID to WAVEMASTER-0.
IMPORTANT! If you turn ON the Hide SSID function on IEEE802.11a, IP100H may not connect to the
access point.
[RECOMMENDATION]
We recommend that you set the access point's authentication as follows:
For example:
• Authentication: WPA-PSK·WPA2-PSK
• Encryption Type: TKIP·AES
• PSK: 5cf97dgh6
STEP 3
[LAN]
IP network
LAN cable
IP1000C
Ask your system administrator for
the IP address and subnet mask.
STEP 3
10
STEP 4 STEP 5
[LAN1]
[LAN]
IP100H (TR 2)
DHCP Client: Enable
STEP 4 STEP 5
STEP 6
LAN cable
PC
DHCP Client: Enable
STEP 6