Removal - Epson EMP-7850 User Manual

Inserting and Removing Cards

Removal

CAUTION
• Do not remove a PC card when the access lamp is lit green, when
connected to a network or when projecting a scenario. Improperly
removing a PC card may result in damage to the card or data
destruction on a memory card.
• The PC card gets hot during and after projector use. Please handle
the card carefully to avoid personal injury or burns.
• When you wish to remove a memory card whilst using CardPlayer,
be sure to close CardPlayer before removal. CardPlayer may
malfunction if a memory card is removed without closing
CardPlayer first. "Closing CardPlayer"
Operation Guide
in the EasyMP
PROCEDURE
Press the eject button above the card slot.
1
The eject button will pop out.
Access lamp
Press the eject button again.
2
Enough of the wireless LAN card will be ejected so that you
can grasp the edge of the card and pull it straight out of the slot.
CAUTION
Be sure to press the eject button back in to prevent it from being
broken or damaged.
EMP-7850 User's Guide
17
Eject button