Adjusting The Feet - Epson EMP-7850 User Manual

Adjusting the Screen Image

Adjusting the Feet

The front adjustable foot and the rear adjustable feet can be extended and
retracted to adjust the tilt of the projector to a maximum of 12º upwards
and 4º downwards.
TIP
If you use the front adjustable foot and the rear adjustable feet to
adjust the tilt of the projector, it may cause keystone distortion to
appear in the projected images. If this happens, the Auto Keystone
function will operate to automatically project images without keystone
distortion. p.45
PROCEDURE
While pulling the foot adjust lever at the front of the
projector, lift up the front of the projector to extend the
front adjustable foot.
Extend the front adjustable foot until the desired angle is obtained,
and then release the foot adjust lever.
To retract the front adjustable foot, gently push down on the projector
while pulling the foot adjust lever.
Foot adjust lever (Front)
TIP
If the projector is tilted vertically or horizontally, turn the bases of the
rear adjustable feet to make fine adjustments to the height of the
projector. When the projector is tilted horizontally, the automatic
keystone correction may not be carried out correctly.
Rear
adjustable foot
Extend Retract
EMP-7850 User's Guide
44