Entering A Password With The Remote Control; Changing The Password Protect Settings - Epson EMP-7850 User Manual

Preventing theft (Password Protect)

Entering a password with the remote control

Press the [Num] button on the remote control to enter the password.
If you press the [Num] button, it will light up and the remote control
buttons will change to numeric keypad mode so that you can enter
numbers.
If you press the [Num] button once more, it will stop lighting up and
numeric keypad mode will be cancelled.
Remote control
Numeric buttons
The buttons inside the box will switch
to numeric keypad mode while the
[Num] button is lit.

Changing the Password Protect settings

Follow the procedure given below to enable Password Protect and to set
the password.
PROCEDURE
Press the [Freeze] button on the remote control for
1
approximately five seconds.
If using the projector's control panel, hold down the
[ ] button and press the [Menu] button for
approximately five seconds.
The Password Protect menu will be displayed.
Remote control
TIP
If Password Protect has already been enabled, the "Password Protect
Release" screen will be displayed.
When the correct password has been entered, the "Password Protect"
menu will be displayed.
See "When Password Protect is enabled"
EMP-7850 User's Guide
59
p.58