Before You Begin; Intended Use; Test Principle - OneTouch ULTRA2 User Manual

Before you begin

Before using this product to test your blood glucose, carefully read this User Guide and the inserts that come with the OneTouch® Ultra®
Test Strips and OneTouch® Ultra® Control Solution. Take note of warnings and cautions throughout this User Guide, which are identified
with . Many people find it helpful to practise the test with control solution before testing with blood for the first time. See Section 6,
Control solution testing.

Intended use

The OneTouch® Ultra® 2 Blood Glucose Monitoring System is intended to be used for the quantitative measurement of glucose (sugar)
in fresh capillary whole blood. The OneTouch® Ultra® 2 System is intended for use outside the body (in vitro diagnostic use) by people
with diabetes at home and by health care professionals in a clinical setting as an aid to monitoring the effectiveness of diabetes control.
It should not be used for the diagnosis of diabetes or for testing newborns.

Test principle

Glucose in the blood sample mixes with special chemicals in the test strip and a small electric current is produced. The strength of this
current changes with the amount of glucose in the blood sample. Your meter measures the current, calculates your blood glucose level,
displays the result, and stores it in its memory.
NOTE: If you have any questions about your OneTouch® Ultra® 2 Blood Glucose Monitoring System, contact LifeScan Customer Care on
Freephone 0800 121 200 (UK) or at 1800 535 676 (Ireland).