Installation Procedure; Overview Of The Installation Procedure - Canon imageRunner iR2270 Service Manual

3.1 Installation procedure

3.1.1 Overview of the Installation Procedure

As a rule, the user is expected to obtain a license key and register it to the device. Detailed
instructions are found in the User's Guide. The following is an outline of the instructions:
1. Using the following URL, access the LMS, and obtain the license key by following the
instructions shown on the screen:
http://www.canon.com/lms/ir/
Memo:
A license key is issued in exchange for the 24-digit number indicated on the License
Access Number Certificate and the serial number of the device (e.g., ABC01234) to
which the license will be registered. The device serial number will be indicated in
response to a press on the Counter key on the iR device (under [Serial No.]).
2. Copy the 24-digit number shown on the Web browser screen in the space given for the
purpose on the License Access Number Certificate.
Caution:
Be sure to double-check the number to avoid an error. Be sure that the user is aware of
the importance of the License Access Number Certificate and that it must be stored away
in a safe place.
3. Make the following selections: user mode>system control setup>license control. Then,
type in the 24-digit number, and click [Execute]. In response, the license key will be
registered and the appropriate functions will be enabled. Otherwise, any of the following
error messages will appear:
"The number of the license key is not correct. Check the license key."
>> Make sure that the license key is not issued for a different device.
>> Make sure that the number has been correctly typed in.
Chapter 3
0008-5793
3-1