Ftp Transmission Errors - Canon imageRunner iR2270 Service Manual

4.3.5 FTP Transmission errors

<FTP transmission error message and error code list>
Message Error
code
No message #022
Transmission #099/
cancelled #995
Address does not #704
appear in address
list.
HD full #702
HD full #703
Address table not #706
available
T-4-5
Cause
Address deleted or invalidated
during transmission reservation.
- Transmission cancelled by
user.
- An error occurred when
address information was being
obtained from the address list.
(Address deleted from list after
scanning, etc. )
Operation stopped because HD
full (work area).
Operation stopped because HD
full (image area).
- Address table being imported/
exported from RUI.
- Address book usage doubled
up with other transmission
component (Fax, etc.).
Remedy
- Retransmit deleted address.
- Check that a group address is specified as
the transfer destination and that it contains
a valid address.
- Check that a group address is specified as
the transfer destination and whether it
contains local print or fax box only.
- Check whether the specified transfer
destination address has been deleted.
Resend.
- Check address list settings. Or, turn unit
OFF/ON.
- Wait a while then retry. Stop broadcast
transmission with other protocols. This
sometimes helps to avoid this problem.
- Wait a while then retry. Stop broadcast
transmission with other protocols. This
sometimes helps to avoid this problem.
- Quit access from RUI.
- Wait a while and then retry
Chapter 4
0008-4685
4-25