Iso-Tech IDM 98-III Instruction Manual page 17

IDM 98-III / 99-III English
Measurement
Category
I
II
III
IV
Weight : 460g (including battery)
Dimensions (W x H x D) : 94mm x190mm x 48mm with holster.
Pollution degree : 2
EMC : EN 61326-1
Shock vibration : Sinusoidal vibration per MIL-PRF- 28800F (5 ~ 55 Hz, 3g max.)
Drop Protection : 4 feet drop to hardwood on concrete floor.
Indoor use only.
Application
Measurements on circuits not directly connected to mains.
Examples include: Measurements on battery powered equipment
and specially protected (internal) mains-derived circuits.
Measurements on circuits directly connected to the low voltage
installation. Examples include: Household appliances, portable tools
and similar equipment.
Measurements performed in the building installation.
Examples include measurements on distribution boards, junction
boxes, socket-outlets and wiring and cables in the fixed installation.
Measurements performed at the source of the low-voltage
installation. Examples include measurements on primary
overcurrent protection devices and electricity Instruments
17