Features; Specifications - ICP DAS USA I-7530 User Manual

Rs-232/can converter
Hide thumbs Also See for I-7530:
Table of Contents

Advertisement

1.1

Features

• Microprocessor inside with 20MHz
• CAN interface connector: D-Sub 9-pin
• Phillip 82C250 CAN transceiver
• Provide One CAN and RS-232 Port
• Built in CAN/RS-232 Converter firmware
• Max transmission speed up to 1M bps for CAN and 115.2K bps for RS-
232 interface
• Provide Software configuration for CAN and RS-232 communication
• Max transmission distance over 1000m based on CAN specification
• Support both CAN 2.0A and CAN 2.0B
• Build-in jumper to provide 120 ohm terminal resistor or not in CAN
network
• Provide power, data flow and error LED indicator for CAN and RS-232
• Built-in a Dual-Watchdog function in the module
• Support transparent communication mode
• Provide a group of RS-232 devices a method to be the network system
(Full-duplex communication mode of RS-232 devices is not supported)
1.2

Specifications

RS-232 specs:
• RS-232 interface connector: D-sub 9-pin female
• RS-232 Baud Rate: 110, 150, 300, 600, 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200
CAN specs:
• CAN interface connector: D-sub 9-pin male
• CAN Baud Rate: 10K, 20K, 50K, 100K, 125K, 250K, 500K, 800K and
1M bps
• Isolation voltage: 3000Vrms on the CAN side
Power requirement:
• Unregulated +10V DC ~ +30V DC
• Power reverse protection, Over-Voltage brown-out protection
• Power consumption: 1W
I-7530 RS-232/CAN Converter User's Manual (Version 2.0, Sep/2007) ------------- 4

Advertisement

Table of Contents
loading

Table of Contents