ICP DAS USA I-7530 User Manual page 16

Note: 1. When the function "Add Checksum" is set to "Yes", users need
to communicate to I-7530 with checksum mechanism.
2. If the "Error Response" is set to "Yes", the error code will be
responded when the incorrect communication commands are sent
to I-7530.
8. Set the CAN parameters for I-7530 CAN port.
Note: 1. About how to set the Acceptance Code and Acceptance Mask ,
please refer to the section 3.2.
2. If the "Pair Connection" is checked, the functions of "End of RS-
232 command", "Fixed Tx CAN ID" , and "Response with CAN ID"
are useful.
3. When "Pair Connection" is checked, I-7530 is into pair
connection mode. If it is unchecked, I-7530 is normal mode. In pair
connection mode, all commands written to I-7530 COM port will
transfer to the CAN bus directly. For more detail information about
pair connection mode, please refer to the section 3.4.
9. Once users have finished all parameter settings, please click the
"Setting" button to store the communication parameters into the
EEPROM on the I-7530.
I-7530 RS-232/CAN Converter User's Manual (Version 2.0, Sep/2007) ------------- 16