Computer Setup-Storage - HP EliteDesk 800 G1 Maintenance & Service Manual

Default Setup
Apply Defaults and
Exit
Ignore Changes
and Exit
Save Changes and
Exit
Computer Setup—Storage
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Option
Device
Configuration
Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Applies the currently selected default settings and clears any established passwords.
Exits Computer Setup without applying or saving any changes.
Saves changes to system configuration or default settings and exits Computer Setup.
Description
Lists all installed BIOS-controlled storage devices.
When a device is selected, detailed information and options are displayed. The following options
may be presented:
Hard Disk: Size, model, firmware version, serial number, connector color, SMART.
●
Computer Setup (F10) Utilities
67