Hard Drive - HP EliteDesk 800 G1 Maintenance & Service Manual

Hard drive

Description
1 TB, 7200 rpm, hard drive, 2.5-inch, SSHD
500 GB, 7200 rpm hard drive, 2.5-inch
500 GB, 7200 rpm, hard drive, 2.5-inch, SSHD
500 GB, 7200 rpm hard drive, 2.5-inch, SED
256 GB solid-state drive (SSD), self-encrypting (SED)
180 GB solid-state drive (SSD), SATA 6.0, MLC
128 GB solid-state drive (SSD)
128 GB solid-state drive (SSD), Self-encrypting Drive (SED), SATA 6.0
120 GB solid-state drive (SSD), SATA 6.0, MLC
NOTE:
Before you remove the old hard drive, be sure to back up the data from the old hard drive so
that you can transfer the data to the new hard drive.
1. Prepare the computer for disassembly (see
2. Remove the access panel.
3. Disconnect the hard drive power cable (1) and data cable (2) from the system board.
28 Chapter 5 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Spare part number
724937-001
745135-001
724938-001
745136-001
746141-001
754076-001
665961-001
746140-001
756459-001
25).