Inserting/Removing Digital Scanner in the CR0078-P Cradle
To insert the scanner in the cradle:
Insert the scanner by placing the bottom of the scanner, at a slight forward angle, into the CR0078-P cradle.
1.
Push the handle back and down until it clicks, engaging the contacts of the scanner and cradle.
2.
Inserting the Digital Scanner in the Cradle
Figure 1-12
To remove the scanner from the cradle:
Remove the scanner by pushing the scanner slightly forward and up out of the CR0078-P cradle.
1.
1
Removing the Digital Scanner in the Cradle
Figure 1-13
1
Click
Click
Getting Started 1 - 15