Chapter 7 USB Interface
Introduction
This chapter provides instructions for programming the cradle to interface with a USB host. The digital scanner
cradle connects directly to a USB host, or a powered USB hub. The USB host can power the cradle and recharge
the digital scanner battery, but this charging method has limitations. See
on page
1-9.
Throughout the programming bar code menus, default values are indicated with asterisks (
*
Indicates Default
NOTE The CR0078-S cradle has the ability to be powered by the USB port instead of an external power supply.
The CR0078-P can only receive power via an external power supply.
*
North American Standard USB Keyboard
Using the USB Interface to Supply Power
*
).
Feature/Option