Checking The Ink Film Reserve; Fixing A Paper Jam - Philips Magic 5 User Manual

8 Place the smaller roll without film in the front tray. The
blue gear wheel must be on the right hand side and the
pin must be inserted in the depression on the left hand
side.
9 Break the chip card from the Plug'n'Print card. Insert
the chip card in the plug socket on the left hand side
next to the ink film tray.
10 Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
11 Close the device. Insert the paper tray in the opening
provided for it behind the paper feeder. Insert paper
again.

Checking the Ink Film Reserve

1 Press _, 46 and _.
2 The number of pages that can still be printed with the
ink film is shown on the display.
3 Press H to return to the starting mode.
If the ink film used up or if there is no ink film in the ma-
chine, a message appears on the display.

Fixing a Paper Jam

1 Remove the paper from the paper feeder and take the
paper tray out of the device.
2 Open the device by lifting the panel using grip in the
centre and folding it down.
Lock the cover of the machine completely into
place when opening the machine. You could be
injured if the cover falls while you are working on
the machine.
3 Carefully pull the paper out.
4 Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
5 Close the device. Insert the paper tray in the opening
provided for it behind the paper feeder. Insert paper
again.
23