Connecting The Telephone Cable; Connecting The Power Cable; Initial Installation - Philips Magic 5 User Manual

Connecting the Telephone Cable

Connecting the Telephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with C (RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
Connecting the Telephone Cable
Extension
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 20).

Connecting the Power Cable

Power Type at Setup Location
Check whether the power type of your machine (in-
dicated on the type plate) matches the power type
available at the setup location.
Connecting the Power Cable
Insert the power cable into the connection located on the
rear side of the machine. Connect the power cable to the
electrical socket.
Connecting the Power Cable

Initial Installation

Starting the Initial Installation
After you connect your device to the mains, the initial in-
stallation commences. Press i. Your device prints a help
page.
Selecting the Language
1 Use / to select the desired display language.
2 Confirm with _.
4
Selecting the Country
Setting the Country Correctly
Always set the country in which you are operating
the machine. Otherwise, your machine is not adapt-
ed to the telephone network. If your country is not
included in the list, you must select a different setting
and use the correct telephone cable for the country.
Consult your retailer.
Setting the Country
1 Use / to select the country in which you are operat-
ing the machine.
2 Confirm with _.
After this input, the machine prints another help page and
checks the telephone line.
Entering Your Number
Header
Your number and name are printed in the top margin of
every page (= header) together with the date, time and page
number.
Entering Your Number
1 Enter your telephone number. You can enter a plus sign
with # or *.
2 Confirm with _.
Entering Your Name
Entering Your Name
1 Enter your name. Letters are entered with the number
buttons (see labels). Enter special characters with 0.
Press the respective button repeatedly until the desired
letter or special character appears on the display.
You can move the cursor with /. You can delete
individual characters with V.
2 Confirm with _.
After the input, the machine prints an overview of the
functions.
Entering the Time and Date
Entering Time/Date
1 Enter the time, for example 14 00 for 2 o'clock
p.m.
2 Enter the date (two digits for each field), for example
08 06 07 for June 8th, 2007.
3 Confirm with _.
Help 2 · Initial Installation Process
You can restart the initial installation process any
time. Press i and 2.