Table of Contents
Advertisement
Drive Status Indicators
LED
eSATA/ USB Connectivity
The LED indicators will show which host interface is currently active on the enclosure.
To switch interfaces, shut the enclosure off and disconnect old cable and then connect
the new cable and turn the enclosure back on. Only one interface can be active at a
time, so it is recommended that only one cable be connected at a time to ensure the
proper interface is chosen.
LED
Instruction Manual
Status
ON
An error has been detected on one or more
OFF
ON
OFF
Status
ON
OFF
ON
OFF
Description
hard drive.
RAID array is currently rebuilding.
Description
eSATA connection active
USB connection active
6
Advertisement
Table of Contents
Need help?
Do you have a question about the SAT3540U3ER and is the answer not in the manual?
Questions and answers