Table of Contents
Advertisement
Printing a Job
5.3
The following are basic guidelines for printing an image on the Arizona T220:
1.
Press the MENU button on the control panel to enter the menu system. The Print
Queue menu is always the first main menu option.
2.
Press ACCEPT to enter the Print Queue menu.
The LCD panel displays the most recent job sent to the print queue by the host
(i.e., PosterShop).
Job number & file name
[ 0] Test Image
(H * V [mm] 271 * 1289, Offsets
Image Size
You have four possible choices:
3.
Press ACCEPT and the control panel display shows the following print information.
Thickness: 00.250mm, Heat: 20%
Offsets: H
Thickness, heat setting and offsets values are retained from the previous time these
values were entered. Ensure that they are appropriate to the current media and print job.
If not, use the method described below to change them.
3/10/03
a) Press CANCEL to quit viewing the print queue and proceed to the next
main menu option which is the Operator menu.
b) Press MENU or BACK to return to the Print Queue menu.
c) Press the + or - keys to cycle through all avaliable print jobs.
d) Press ACCEPT to confirm that you want to pr0ceed with the displayed
print job.
+0mm, V +755 mm
Pass mode
(+ 0 * +755)
Image Offsets
(+/- to change)
Printing a Job |
Direction
mode
8B
5-41
Advertisement
Table of Contents
